Skip to main content

Used FARO Inspection & Lab Equipment Sold by Meadoworks

A FARO machine we've bought and sold. We don't have a FARO machine listed online right now — most of our inventory sells before it's listed. Tell us what you need and we'll source one, or request a valuation if you own FARO equipment you're ready to sell.

Get alerts about new inspection & metrology listings by email

FARO Equipment Categories We Trade

Browse what's currently for sale in the categories these FARO machines came from, or see the full sold archive for each.

Looking to Sell Your FARO?

Meadoworks is an active cash buyer of used industrial equipment. Get a free valuation from our AMEA-certified appraisers.

Sell Your Equipment

About FARO

USAEst. 1982

FARO Technologies started in 1982 and is headquartered in Lake Mary, Florida. The company began with articulated measurement devices and later focused on industrial metrology. AMETEK completed its acquisition of FARO on July 21, 2025, and FARO now sits in AMETEK's Ultra Precision Technologies division. The official site remains faro.com.

The core hardware is the FaroArm, a portable coordinate measuring machine that probes parts on the floor instead of on a fixed granite CMM. Current arms are the Quantum X series, offered in several lengths and accuracy grades, with optional laser line probes for non-contact scanning. Earlier generations that still circulate used include the Edge, Quantum, Quantum Max, Prime, Fusion, and Platinum.

FARO also builds the Vantage laser tracker for large assemblies and the Focus laser scanner for plant and site capture, plus CAM2 software for inspection against CAD. A used buyer usually cares most about measuring range, axis count, whether a laser line probe is included, and whether the last factory calibration is still current.

The Edge generation, introduced around 2011, is a 7-axis arm that was commonly paired with a Laser Line Probe. It has been superseded by the Quantum and Quantum X ScanArms, so resale prices sit well below late-model arms. FARO service can still certify many Edge arms; an expired certificate is a buyer cost, not a reason the arm cannot be used.

On the used market, confirm the measuring volume (1.8 m, 2.7 m, and 3.7 m Edge lengths were common), that the probe handle and hard case are present, and whether software licenses transfer. Meadoworks lists these as inspection equipment with the facts the seller and the photos support, and leaves calibration date and software off the page until they are documented.

Meadoworks is your trusted source for used FARO equipment. As third-generation industrial equipment dealers and AMEA-certified appraisers with over 50 years of experience, we offer quality-inspected FARO machines at competitive prices. Most of our FARO inventory sells before we can list it online — call 800-323-0307 for equipment not yet listed.

Every machine includes detailed specifications and high-resolution photos, and inspection visits are available for most equipment. We ship worldwide with experienced rigging partners and offer financing for qualified buyers. Have FARO equipment to sell? Get a free valuation or contact our team.

Used FARO Equipment by Type

From our own listings: machines for sale now and machines Meadoworks has sold.

TypeFor sale nowSold
Used FARO Inspection & Lab Equipment01

Popular FARO Models

FARO Edge, FARO Quantum X, FARO Quantum Max, FARO Gage, FARO Vantage, FARO Focus, FARO CAM2.

Looking for a specific model? Call 800-323-0307 — we often have unlisted FARO machines coming in from plant closures.

FARO Specialties

Portable measurement armsArticulated CMMsLaser line probesLaser trackers3D laser scannersShop-floor inspectionReverse engineering

Frequently Asked Questions

Is a used FARO Edge still supported?

FARO service can still calibrate many Edge arms. Ask for the last certificate date. An expired cert usually means a recertification cost, not that the arm is unusable.

What does the measuring length mean?

The length, such as 9 ft or 2.7 m, is the spherical working volume of the arm, not a machine-tool travel. Match it to the largest part you need to probe in one setup.

Does the arm include a laser scanner?

Only if a Laser Line Probe is listed with it. An arm sold alone probes with a hard probe. Scanning requires the probe head, and often its calibration plate.

What software does a used FaroArm need?

Inspection is typically done in CAM2 or a third-party package such as PolyWorks. Licenses do not always transfer with the hardware, so confirm what is included before you buy.

How does an Edge compare with a Quantum arm?

The Edge is an earlier 7-axis generation. Quantum, Quantum Max, and Quantum X arms are newer, generally more accurate, and cost more used. The Edge remains a practical portable CMM when the volume and accuracy fit the work.

Looking for FARO Equipment?

Tell our team your requirements. We source equipment from plant closures and facilities across North America and can often locate specific machines.