Used Densifiers & Agglomerators for Sale
1 result
Looking for Something Specific?
Most of our inventory sells before we can list it online. If you need a specific brand, model, or specification, tell us what you need—we have access to unlisted equipment and machines coming in from plant closures.
Browse Used Densifiers & Agglomerators by Brand
Browse Used Densifiers & Agglomerators by Country
Looking to Sell Your Densifiers & Agglomerators?
Meadoworks is an active cash buyer of used industrial equipment. Get a free valuation from our AMEA-certified appraisers.
About Used Densifiers & Agglomerators
Densifiers and agglomerators increase the bulk density of low-density plastic materials like film, foam, and fiber, making them easier to process in extruders and pelletizers. Densifier machines compact foam and film waste into dense chunks or pellets. Foam melters (also called foam densifiers) process EPS and EPE foam waste into compact blocks or ingots.
Meadoworks stocks used densifiers and agglomerators. Contact us at 800-323-0307.
How to Choose Used Densifiers & Agglomerators
Make light scrap feedable
Film, fiber, and foam take up the hopper and will not feed a screw. A densifier or an agglomerator compacts them into chunks a pelletizer or an extruder can bite. Friction and a little heat fuse the surface. A foam melter does the same job on EPS and EPE by melting it into a block or an ingot.
The output is not a finished pellet unless a cutter is part of the machine. Many shops still run the chunks through an extruder.
What wears
Blades, the bowl, and the bearings. Film wrapped around a dull rotor makes heat and no density. Water, on machines that use a quench, has to be there or the chunk stays a melt.
Rate is pounds of a named material. Film and foam numbers are not interchangeable.
By size: Typical Used Densifiers & Agglomerators Price Ranges
Foam and EPS densifiers: $10,000–$40,000
Film agglomerators and densifiers: $30,000–$120,000
Large densifying lines with feed and cutter: $100,000+
What moves the price — rate on the material it was built for, drive horsepower, rotor and knife wear, and whether the feed conveyor comes with it.
These are typical used-market ranges, not a quote on any machine. For a current figure on a specific machine, request a quote or call 800-323-0307.
By brand
NEPCO: Compacting equipment we have listed.
Hosokawa, Zerma and Herbold: Agglomerators and densifiers that reach the used market.
Meadoworks track record
Our size-reduction record is mostly granulators — 300+ beside-the-press units sold — plus Lindner and Genox shredding lines, an NGR reclaim line and a KIE wash system.
Densifiers & Agglomerators Specs to Compare
| Spec | Typical range | Why it matters |
|---|---|---|
| Material | Film, fiber, or foam. The rotor and the heat were built for one of them. | |
| Rate (lb/hr) | About 100–1,000 lb/hr on film or foam | On that material. A nameplate without a material is a guess. |
| Output | Chunks, a pellet, or a block. Know which one leaves the machine. | |
| Drive (hp) | About 20–200 hp | Friction comes from this. An undersized drive stalls on a wet film. |
Material
Film, fiber, or foam. The rotor and the heat were built for one of them.
Rate (lb/hr)
Typical range: About 100–1,000 lb/hr on film or foam
On that material. A nameplate without a material is a guess.
Output
Chunks, a pellet, or a block. Know which one leaves the machine.
Drive (hp)
Typical range: About 20–200 hp
Friction comes from this. An undersized drive stalls on a wet film.
What to Inspect on Used Densifiers & Agglomerators
Open the bowl
Blades and the wall. A polished bowl is not densifying.
Turn the rotor
Bearings. Film lines destroy a seal that already weeps.
Find the water
If the machine quenches. No water, no solid chunk.
Name the scrap
The last material. Foam and printed film do not share a setup.
Related Equipment
- Strand Pelletizers
Turn densified chunks into pellets after they are extruded
More in Recycling & Size Reduction
Types of Size Reduction & Recycling
Common Applications
Frequently Asked Questions
What is a densifier?
A densifier machine compacts low-bulk-density plastic materials (film, foam, fiber) into denser form for efficient processing. Foam melters and foam densifiers specifically process EPS and EPE foam waste by heating and compressing it into solid blocks or ingots, reducing volume by 40-90x for economical shipping and recycling.
What does a used foam densifier cost?
Foam and EPS densifiers usually run about $10,000–$40,000 used and film agglomerators about $30,000–$120,000. Typical ranges, not a quote — call 800-323-0307.
Densifier or agglomerator — what is the difference?
Both raise bulk density. A densifier compacts or melts foam into a block or log; an agglomerator uses friction heat to turn film or fiber into small dense crumbs an extruder can feed.
What should I inspect on a used densifier?
Check the rotor and knives, the screw or ram, heater bands on a melter, and the drive. Ask what material it ran — a film machine is not a foam machine.
Can a densifier feed an extruder directly?
An agglomerator's crumb usually can. A foam densifier's log or block usually needs grinding first.
Related Resources
Need Help Finding the Right Equipment?
Contact our team with your specifications and we'll help you find the right machine.
