Skip to main content

Used Hot Runner Systems & Controllers for Sale


10 results

Hot Runner Systems & Controllers by the numbers

From our own catalog: machines listed now and machines we have sold. Updated every few minutes.

Our track record

101 machines sold · 17 makes · model years 2001–2024 · 37 sold at our own auctions

By brand

BrandIn stock nowSold by MeadoworksModel years
Gammaflux3142001
Husky2192019–2024
DME133—
Mold-Masters13—
Control King10—
PETS07—
Dynisco06—
Incoe04—
Get alerts about new auxiliary equipment listings by email

Looking for Something Specific?

Most of our inventory sells before we can list it online. If you need a specific brand, model, or specification, tell us what you need—we have access to unlisted equipment and machines coming in from plant closures.

Browse Used Hot Runner Systems & Controllers by Country

Looking to Sell Your Hot Runner Systems & Controllers?

Meadoworks is an active cash buyer of used industrial equipment. Get a free valuation from our AMEA-certified appraisers.

Sell Your Equipment

About Used Hot Runner Systems & Controllers

Hot runner systems and controllers maintain molten plastic in the runner system between shots, eliminating cold runner waste and reducing cycle times. Used hot runner controllers regulate temperature zones in the hot runner manifold and nozzles. Mold-Masters (also known as Mold Masters, MoldMasters, or Mold Master) is the world's largest hot runner manufacturer.

Husky hot runner controllers are the industry standard for PET preform and closure molding. Used hot runner systems include complete manifolds with nozzles and controllers.

Meadoworks stocks used hot runner controllers, Mold-Masters systems, Husky hot runner controllers, Synventive systems, and other hot runner equipment. Contact us at 800-323-0307.

Hot runner controllers are chosen by zone count, thermocouple type (J or K) and connector standard, which must match your molds' wiring. Modular mainframes let you add zones; newer controllers add diagnostics such as heater and thermocouple fault detection and wiring checks. When buying used, check each zone card, the power switching (triac/SSR), cables and connectors.

How to Choose a Used Hot Runner System

Manifold, nozzles, controller

A hot runner keeps the runner molten so the next shot does not mold a cold runner. You are buying a manifold, the nozzles, and a controller that holds each zone. A controller without the manifold is a box of zones. A manifold without a controller you can run is a cold block of steel.

Zones have to match. A 12-zone controller on an 8-drop manifold can work. An 8-zone controller on a 16-drop manifold cannot.

It is not the mold temperature

The hot runner is the melt path. A water temperature controller holds the mold steel. You usually need both, and they are different machines. Nozzle tip style and the gate have to match the resin and the tool you will hang this in.

Thermocouples and heaters fail first. A zone that will not come up is an open heater or a dead couple, and the part will show it.

By size: Typical Used Hot Runner System Price Ranges

1–12 zone controllers: $500–$3,000

16–48 zone mainframes: $3,000–$12,000

64+ zone mainframes and complete systems: $8,000–$20,000+

What moves the price — zone count, card type and how many cards are in the frame, touchscreen or not, cables included, and whether every zone heats and reads.

These are typical used-market ranges, not a quote on any machine. For a current figure on a specific machine, request a quote or call 800-323-0307.

Hot Runner System Specs to Compare

Zones

Typical range: About 2–96 zones

Controller channels versus drops on the manifold. They have to cover every nozzle.

Drops

The cavities this manifold feeds. A different cavity count needs a different manifold.

Voltage

Typical range: 240 V per zone; 208–480 V supply

Heaters and the controller. A mismatch will not hold temperature.

Gate

Typical range: Open tip or valve gate

Tip and gate style for the resin. A valve gate is a different manifold from an open tip.

What to Inspect on a Used Hot Runner System

  • Power each zone

    Heater resistance and a thermocouple that reads. A dead zone is the inspection.

  • Count drops

    Against the mold you will put this in.

  • Look at the tips

    Wear and the gate. A damaged tip is a string or a blush.

  • Match the controller

    Zones, voltage, and cables that actually plug into this manifold.

Related Equipment

Common Applications

Injection molding
PET preform molding
Multi-cavity molding
Automotive parts
Packaging

Frequently Asked Questions

How much does a used hot runner controller cost?

Used hot runner controller prices range from $500-$3,000 for small zone controllers to $5,000-$20,000+ for large multi-zone systems. Complete hot runner manifold and nozzle systems cost more. Mold Masters and Husky hot runner controllers are the most common brands. Contact Meadoworks at 800-323-0307.

How many zones does my hot runner controller need?

One zone per heated element — each nozzle plus each manifold heater. Count the zones on your largest mold and allow a few spares.

Will a used hot runner controller work with my molds?

It will if the thermocouple type (J or K), connectors and wiring standard match your molds; adapter cables can bridge some differences.

Which hot runner controller brands has Meadoworks sold most?

DME, Husky and Gammaflux, then PETS and Dynisco. The brand table on this page shows how many of each we have sold and how many are listed now.

Can a DME controller run a mold built for a Husky system?

Often, if the thermocouple type (J or K), the zone count and the connector pinout match. An adapter cable can bridge a pinout difference; a type mismatch reads the wrong temperature.

Need Help Finding the Right Equipment?

Contact our team with your specifications and we'll help you find the right machine.