Skip to main content

Used Plastic Wash & Reclaim Lines for Sale


Nothing is listed right now — these are machines we've recently sold. or tell us what you need.

Recently sold

Get alerts about new recycling listings by email

Looking for Something Specific?

Most of our inventory sells before we can list it online. If you need a specific brand, model, or specification, tell us what you need—we have access to unlisted equipment and machines coming in from plant closures.

Browse Used Plastic Wash & Reclaim Lines by Brand

Looking to Sell Your Plastic Wash & Reclaim Lines?

Meadoworks is an active cash buyer of used industrial equipment. Get a free valuation from our AMEA-certified appraisers.

Sell Your Equipment

About Used Plastic Wash & Reclaim Lines

Plastic wash and reclaim lines process contaminated post-consumer and post-industrial plastic waste into clean flake or pellet form ready for reprocessing. Used plastic recycling machinery includes complete wash lines with shredders, wash tanks, friction washers, rinse systems, drying centrifuges, and melt filtration systems.

Plastic bottle recycling equipment processes PET and HDPE bottles through sorting, grinding, washing, and drying stages. Plastic recycling machine systems can handle post-consumer bottles, post-industrial scrap, agricultural film, and other waste streams. Used recycling equipment and recycling machinery for sale offer significant savings over new systems.

Meadoworks sells used plastic recycling equipment, plastic recycling machines and used recycling machinery; wash and reclaim systems we have sold include NGR, KIE, YE-i Machinery and Beringer, and Erema, Herbold, Lindner and Starlinger lines also reach the used market. Contact us at 800-323-0307 for plastic recycling equipment prices and used recycling equipment availability.

How to Choose a Used Plastic Wash Line

Dirty flake in, clean flake out

A wash line takes bottles or film that have been ground or shredded and knocks off dirt, labels, and glue. A typical bottle line is a sink-float tank, a friction washer, a rinse, and a dryer. PET sinks. Polyethylene and polypropylene float. That split is the point of the tank, and a line built for one polymer is a poor guess for the other.

The shredder or granulator in front, and the dryer at the end, are often separate lots. A washer with no water treatment is a machine you still have to feed and drain.

Rate is the whole line

Pounds per hour is the slowest machine in the line, not the number painted on the washer. Film and bottles do not share a wash. Glue and paper need dwell and mechanical action. A friction washer that is bald will not replace a longer tank.

Ask the last stream: post-consumer bottles, film, or plant scrap. The wear and the chemistry follow that.

By size: Typical Used Plastic Wash Line Price Ranges

Single-stage wash or regrind cleaning systems: $50,000–$150,000

Complete film or rigid wash lines (about 1,000–2,000 lb/hr): $100,000–$400,000

Bottle-to-flake PET or HDPE lines: $250,000–$500,000+

What moves the price — rate, how many stages (pre-wash, friction, float-sink, rinse, dryer), stainless contact parts, the water treatment that comes with it, and whether the line was running when it came down.

These are typical used-market ranges, not a quote on any machine. For a current figure on a specific machine, request a quote or call 800-323-0307.

By brand

NGR: A reclaim line we have sold.

KIE: A complete regrind wash system we have sold.

YE-i Machinery: A reclaim pelletizing line we have sold.

Beringer: A jet cleaner we have sold.

Erema, Herbold, Lindner and Starlinger: Builders whose lines also reach the used market.

Meadoworks track record

Our size-reduction record is mostly granulators — 300+ beside-the-press units sold — plus Lindner and Genox shredding lines, an NGR reclaim line and a KIE wash system.

Plastic Wash Line Specs to Compare

Polymer

Typical range: PET (sinks) or PE / PP (floats)

PET sink or PE/PP float. The tank is built around one of those.

Rate (lb/hr)

Typical range: About 500–5,000 lb/hr

The line, not one motor. The slowest stage sets it.

Stages

Typical range: 4–8 stages from pre-wash to dryer

Pre-wash, friction, rinse, dry. A single tank is not a bottle line.

Water

Fresh water, filtration, and where the sludge goes. The washer does not include the drain.

What to Inspect on a Used Plastic Wash Line

  • Walk the stages

    Each tank and washer should be there. A missing dryer is wet flake you cannot extrude.

  • Turn the friction washer

    Paddles wear smooth. Smooth paddles do not scrub.

  • Fill a float tank

    If you can. It has to hold water and move the stream.

  • Name the polymer

    Against the last material. PET and film are different lines.

Related Equipment

Common Applications

PET bottle recycling
HDPE recycling
Film recycling
Post-consumer plastics
Post-industrial scrap
Agricultural film

Frequently Asked Questions

How much does plastic recycling equipment cost?

Used plastic recycling equipment prices vary widely by system complexity. Simple wash lines: $50,000-$150,000. Complete bottle recycling lines: $100,000-$500,000+. Plastic recycling machine prices depend on throughput capacity, material type, and level of automation. Contact Meadoworks at 800-323-0307 for plastic recycling equipment prices.

What equipment do I need to start a plastic recycling business?

A basic plastic recycling operation needs: 1) sorting equipment, 2) shredder or granulator for size reduction, 3) wash system for cleaning, 4) dryer, and 5) pelletizer or extruder for producing recycled pellets. For bottle recycling, add optical sorting and label removal. Meadoworks can help you source all necessary used recycling machinery.

How much does a PET bottle recycling line cost used?

A complete used bottle-to-flake line usually runs about $250,000–$500,000+, and simpler wash systems $50,000–$150,000. These are typical ranges, not a quote — call 800-323-0307 about a specific line.

What should I check on a used wash line?

Walk the whole line: the friction washer's paddles and screen, float-sink tank and its screw, pumps, the dryer or centrifuge, and the water filtration. The slowest stage sets the rate.

Can one wash line run film and rigid plastic?

Rarely without changes. Film needs a different feed, friction washing and drying than bottles or rigid regrind, so most lines are built for one stream.

Need Help Finding the Right Equipment?

Contact our team with your specifications and we'll help you find the right machine.