Used Surface Grinders for Sale
All used grinding machines (8) →
Recently sold
SOLDItem #6100
Parker Majestic 6" x 18" Surface Grinder
USA
SOLDItem #6102
Boyer Schultz Challenger H612 Surface Grinder
USA
SOLDItem #6101
Nicco NSG-64H Surface Grinder
USA
SOLDItem #6215
Boyer-Shultz Challenger H612 6" x 12" Surface Grinder
USA
Item #1295
Reid 2B
USA
Looking for Something Specific?
Most of our inventory sells before we can list it online. If you need a specific brand, model, or specification, tell us what you need—we have access to unlisted equipment and machines coming in from plant closures.
Browse Used Surface Grinders by Brand
Browse Used Surface Grinders by Country
Looking to Sell Your Surface Grinders?
Meadoworks is an active cash buyer of used industrial equipment. Get a free valuation from our AMEA-certified appraisers.
About Used Surface Grinders
Surface grinders produce precision flat surfaces by moving a workpiece back and forth under a rotating abrasive wheel. These machines are essential in tool rooms, die shops, and precision manufacturing for grinding hardened steel, tool steel, carbide, and ceramics to tight tolerances and fine surface finishes. Surface grinders range from small manual machines with 6×12-inch tables to large CNC models with 24×60-inch or larger tables.
Key specifications include table size, maximum grinding length and width, spindle horsepower, spindle speed, and magnetic chuck capacity. CNC surface grinders with automatic downfeed and table reciprocation enable unattended grinding cycles with sub-micron accuracy.
Surface grinders from Okamoto, Kent, Parker Majestic, Harig, Boyar-Schultz, Covel, Nicco and Bridgeport are in the Meadoworks sales record. Contact us at 800-323-0307 for surface grinder pricing.
How to Choose a Used Surface Grinder
Manual, Automatic or CNC Surface Grinder
A hand-feed 6 x 12 or 6 x 18 in grinder is the tool-room standard for small flat work, punches and die sections. A hydraulic machine with automatic cross feed and downfeed runs a pass unattended and suits larger plates and repeat work. A CNC machine adds programmed dressing and profiles for production grinding.
Size the table and magnetic chuck to the largest plate, then check the wheel diameter and spindle power. A rotary-table grinder flattens many small parts at once and is a different machine from a reciprocating one.
By Size: Used Surface Grinder Price Ranges
6 x 12 to 6 x 18 in hand-feed grinders: about $5,000–$12,000.
8 x 24 to 12 x 24 in hydraulic and automatic grinders: about $8,000–$30,000.
CNC, rotary and 16 x 40 in and larger grinders: about $20,000–$150,000.
What moves the price: table size, automatic downfeed, the magnetic chuck and its controller, spindle condition, way wear, a coolant and dust system, and a wheel dresser or balancing stand. These are typical used-market ranges, not a quote on any one machine. Call 800-323-0307 for a current price.
Surface Grinder Brands We've Sold and Listed
Okamoto, Kent, Parker Majestic, Harig, Boyar-Schultz, Covel, Nicco, Bridgeport and Acer reciprocating grinders, a Reid rotary grinder and a Tridex electrochemical grinder have all moved through Meadoworks.
Our stock changes as plants close and consolidate. If the make you want is not in stock, tell us the size and control you need and we will look for one.
Surface Grinder Specs to Compare
| Spec | Typical range | Why it matters |
|---|---|---|
| Table size | Often 6 x 12 to 16 x 40 in | Sets the largest plate that fits under the wheel in one setup. |
| Magnetic chuck | Usually matches the table, 6 x 12 to 16 x 40 in | An electromagnetic chuck with a working controller holds thin parts flat; a dead chuck is a costly fix. |
| Wheel diameter | Often 7–14 in | A larger wheel covers more surface and lasts longer between dressings. |
| Spindle motor | Often 1–7.5 hp | More power holds speed on wide passes and heavier stock removal. |
| Downfeed resolution | Often 0.0001 in | Fine increments are what make tenths-tolerance work repeatable. |
Table size
Typical range: Often 6 x 12 to 16 x 40 in
Sets the largest plate that fits under the wheel in one setup.
Magnetic chuck
Typical range: Usually matches the table, 6 x 12 to 16 x 40 in
An electromagnetic chuck with a working controller holds thin parts flat; a dead chuck is a costly fix.
Wheel diameter
Typical range: Often 7–14 in
A larger wheel covers more surface and lasts longer between dressings.
Spindle motor
Typical range: Often 1–7.5 hp
More power holds speed on wide passes and heavier stock removal.
Downfeed resolution
Typical range: Often 0.0001 in
Fine increments are what make tenths-tolerance work repeatable.
What to Inspect on a Used Surface Grinder
Run the spindle
Listen for bearing noise and check for vibration marks on a test plate.
Test the chuck
Confirm the magnetic chuck holds and releases, and that its top is flat and not cut deep.
Check the ways
Look for scoring and uneven wear on the table and cross-feed ways.
Try every feed
Run the hydraulic table, cross feed and automatic downfeed through their full travel.
Grind a test piece
Measure flatness and finish on a ground block across the whole table.
List the extras
Note the wheel dresser, balancing stand, spare wheels and coolant or dust system.
Related Equipment
- Used EDM Machines
The other way tool rooms finish hardened steel and carbide
- Used CNC Lathes & Turning Centers
Turn the part close to size before it is ground
- Used Manual Mills, Drills & Lathes
The rest of the tool room around the grinder
Types of Grinding Equipment
Common Applications
Frequently Asked Questions
What is a surface grinder used for?
A surface grinder produces precision flat surfaces by moving a workpiece on a reciprocating table under a rotating abrasive wheel. Surface grinders are used in tool rooms and die shops to grind hardened steel, tool steel, and carbide to tight tolerances (often within 0.0001 inch) and fine surface finishes.
How much does a used surface grinder cost?
Used surface grinder prices range from $5,000 for small manual models (6×12 or 6×18 table) to $150,000+ for large CNC surface grinders. Blanchard rotary surface grinders and Okamoto CNC models command premium prices. Contact Meadoworks at 800-323-0307 for current pricing.
What size surface grinder do I need?
Size the table and magnetic chuck to the largest plate you grind, with some room to spare. A 6 x 12 or 6 x 18 in machine covers most punches, inserts and die sections in a tool room. Mold plates and die shoes call for 12 x 24 in or larger tables. If you grind many small parts to the same thickness, a rotary-table grinder may be faster than a reciprocating one.
What should I check on a used surface grinder?
Run the spindle and listen for bearing noise, then grind a test block and measure flatness and finish. Check that the magnetic chuck holds and releases and that its top is not worn deep. Look at the table and cross-feed ways for scoring, and run the hydraulic table and automatic downfeed through full travel. Ask which wheels, dresser and balancing stand come with the machine.
What is the difference between a reciprocating and a rotary surface grinder?
A reciprocating surface grinder moves a rectangular table back and forth under the wheel, which suits plates, die sections and profile work. A rotary surface grinder spins a round magnetic table under the wheel and grinds many small parts flat in one load, which suits production work on washers, seals and inserts. Blanchard-type vertical-spindle rotary grinders remove heavy stock from large plates quickly.
Related Resources
Need Help Finding the Right Equipment?
Contact our team with your specifications and we'll help you find the right machine.