Used Dual & Quad Shaft Shredders for Sale
All used plastic shredders (2) →
0 results
No matching equipment is listed online right now.
Most of our inventory sells before we can list it. Browse related equipment or tell us what you need — we source from plant closures across North America.
Related Equipment Available Now

Lot 1 · Item #7110
Cresswood HF6860-125LR CS GBP Shredder
USA · Register to see location
Taking offers · bidding opens Tue, Dec 1, 12:01 AM CT

Item #6782
2011 Econogrind ESH 5010 Granulator
USA

Item #6329
Satake FMS-2000 Optical Color Sorter
USA

Item #6000
2018 Bühler Sortex B
UK
VideoItem #5710
Vecoplan - VA1300MXL
USA
VideoItem #5711
Cumberland - X1400
USA
Looking for Something Specific?
Most of our inventory sells before we can list it online. If you need a specific brand, model, or specification, tell us what you need—we have access to unlisted equipment and machines coming in from plant closures.
Browse Used Dual & Quad Shaft Shredders by Brand
Looking to Sell Your Dual & Quad Shaft Shredders?
Meadoworks is an active cash buyer of used industrial equipment. Get a free valuation from our AMEA-certified appraisers.
About Used Dual & Quad Shaft Shredders
Dual shaft and quad shaft shredders use counter-rotating shafts with interlocking cutting elements for aggressive size reduction of difficult materials. Dual shaft shredders handle mixed waste, bulky items, and materials that would jam single shaft machines. Quad shaft shredders produce finer, more uniform output without the need for a screen.
Meadoworks stocks used dual shaft shredders and quad shaft shredders from SSI, Vecoplan, and Weima. Contact us at 800-323-0307.
How to Choose a Used Dual-Shaft Shredder
Before the granulator
A dual-shaft shredder tears bulky plastic, film bales, and purgings down so a granulator can finish them. The shafts turn slowly, with high torque, and they do not use a fine screen the way a granulator does. A quad-shaft machine adds a second pair and a screen for a tighter chip. A beside-the-press granulator will not start on a bale.
Shaft length and the motor torque are the capacity. A shredder that stalls on your bale is undersized, not in need of a sharper tooth.
What the cutters cost
Cutters and spacers wear and they are the rebuild. A machine with rounded teeth will push material instead of grabbing it. The gearbox and the coupling take the shock. Metal in the feed, if your stream has it, needs a stop or you will buy a gearbox.
Ask the last material. Tires, pallets, and film are different torque and different cutters.
By size: Typical Used Dual-Shaft Shredder Price Ranges
Small dual-shaft shredders (about 20–50 hp): $20,000–$50,000
Mid-size dual-shaft shredders (about 50–150 hp): $40,000–$100,000
Large dual- and quad-shaft shredders (150+ hp): $75,000–$250,000+
What moves the price — shaft count and length, drive horsepower (electric or hydraulic), cutter condition, the gearbox, and whether the feed and discharge conveyors come with it.
These are typical used-market ranges, not a quote on any machine. For a current figure on a specific machine, request a quote or call 800-323-0307.
By brand
SSI: Dual-shaft and quad-shaft shredders; common on the used market.
Vecoplan: Single- and dual-shaft shredders — we have listed a Vecoplan.
Weima and Untha: Shredders for plastics and mixed waste.
Lindner and Genox: Shredding lines we have sold.
Meadoworks track record
Our size-reduction record is mostly granulators — 300+ beside-the-press units sold — plus Lindner and Genox shredding lines, an NGR reclaim line and a KIE wash system.
Dual-Shaft Shredder Specs to Compare
| Spec | Typical range | Why it matters |
|---|---|---|
| Shafts | 2 or 4 | Dual shaft rips. Quad shaft sizes further. Read which one is in the frame. |
| Shaft length (in) | About 20–80 in | The chamber. Your bale or your part has to enter it. |
| Drive (hp) | About 20–300 hp | Torque at low speed. Horsepower on the nameplate has to match the material. |
| Cutter condition | Hooks sharp, spacers in place | Rounded teeth and missing spacers are a rebuild before the first bale. |
Shafts
Typical range: 2 or 4
Dual shaft rips. Quad shaft sizes further. Read which one is in the frame.
Shaft length (in)
Typical range: About 20–80 in
The chamber. Your bale or your part has to enter it.
Drive (hp)
Typical range: About 20–300 hp
Torque at low speed. Horsepower on the nameplate has to match the material.
Cutter condition
Typical range: Hooks sharp, spacers in place
Rounded teeth and missing spacers are a rebuild before the first bale.
What to Inspect on a Used Dual-Shaft Shredder
Look at the teeth
Sharp enough to grab. A polished round tooth will not start a bale.
Turn the shafts
Gearbox noise and a coupling that is already cracked.
Check the hopper
It has to take the piece you will feed. A ram, if there is one, has to cycle.
Name the material
Film, purgings, and rigid parts do not share a setup. Ask what it last ate.
Related Equipment
- Granulators
The second cut after a shredder
More in Recycling & Size Reduction
Types of Size Reduction & Recycling
Common Applications
Frequently Asked Questions
How much does a used dual shaft shredder cost?
Used dual shaft shredder prices range from $20,000-$50,000 for smaller units to $75,000-$250,000+ for large industrial dual shaft shredders. Quad shaft shredders are typically priced higher due to their more complex design. Contact Meadoworks at 800-323-0307.
What does a used single-shaft shredder for recycling cost?
Small single-shaft shredders run about $8,000–$30,000 used and large ones $60,000–$150,000. Dual-shaft shredders run about $20,000–$100,000, and large quad-shaft units $75,000–$250,000+. Typical ranges, not a quote.
Dual-shaft or quad-shaft shredder?
A dual-shaft shredder rips bulky material into strips. A quad-shaft shredder adds two more shafts and a screen so the output comes out smaller and more even, at more cost and more wear parts.
What should I inspect on a used dual-shaft shredder?
Look at the cutter hooks and spacers, check the shafts for bend and bearing play, ask for gearbox oil history, and run it with material to see that the reverse-on-jam works.
Do I need a granulator after a shredder?
Usually. A shredder makes a coarse strip or chunk; a granulator makes the uniform regrind an extruder or press can feed.
Related Resources
Need Help Finding the Right Equipment?
Contact our team with your specifications and we'll help you find the right machine.