Used Thermoforming Trim Presses for Sale
1 result
Looking for Something Specific?
Most of our inventory sells before we can list it online. If you need a specific brand, model, or specification, tell us what you need—we have access to unlisted equipment and machines coming in from plant closures.
Browse Used Thermoforming Trim Presses by Brand
Browse Used Thermoforming Trim Presses by Country
Looking to Sell Your Thermoforming Trim Presses?
Meadoworks is an active cash buyer of used industrial equipment. Get a free valuation from our AMEA-certified appraisers.
About Used Thermoforming Trim Presses
Thermoforming trim presses cut thermoformed parts from the surrounding sheet material using steel rule dies, matched metal dies, or CNC routing. Trim presses are essential downstream equipment for shuttle and rotary thermoforming operations. Used trim presses include hydraulic presses, pneumatic presses, and CNC router trimming systems.
Meadoworks stocks used thermoforming trim presses and trimming equipment. Contact us at 800-323-0307.
How to Choose a Used Thermoforming Trim Press
How the part leaves the sheet
A trim press cuts the formed part out of the web. Steel-rule dies, matched metal dies, and CNC routing are different cuts. Steel rule is the common shuttle-line tool. Matched metal holds a tighter edge. CNC routing is for a thick part or a short run where a die does not pay.
Tonnage has to drive the die through the gauge you form. A press sized for 0.060-inch sheet stalls on a 0.250-inch tub.
Registration
The formed sheet has to land on the die in the same place every cycle. Guides, pins, or a vision stop do that. A trim that wanders cuts into the part.
The die is often a separate lot. A press without the rule die for your part is a press you still have to tool.
Thermoforming Trim Press Specs to Compare
| Spec | Why it matters |
|---|---|
| Cut | Steel rule, matched metal, or CNC. The edge you need picks it. |
| Tonnage | Has to drive the die through your gauge. Thicker sheet needs more. |
| Bed (in) | The formed sheet has to fit. A rotary former's blank can be larger than a small trim bed. |
| Registration | Pins or guides. Without them the cut walks. |
Cut
Steel rule, matched metal, or CNC. The edge you need picks it.
Tonnage
Has to drive the die through your gauge. Thicker sheet needs more.
Bed (in)
The formed sheet has to fit. A rotary former's blank can be larger than a small trim bed.
Registration
Pins or guides. Without them the cut walks.
What to Inspect on a Used Thermoforming Trim Press
Cycle the ram
Full stroke, even pressure. A cocked platen cuts one side and misses the other.
Look at the die
If it is included. Nicked rule and a crushed urethane pad make a hairy edge.
Fit a sheet
Bed size against the former you will feed.
Check the stops
The sheet has to register. A missing pin is scrap.
More Thermoformers types
Types of Thermoforming
Common Applications
Frequently Asked Questions
What is a thermoforming trim press?
A thermoforming trim press cuts formed plastic parts from the surrounding sheet using a steel rule die or matched metal die. The press applies force to punch through the formed sheet at the trim line, separating the finished part from the web. CNC router trimmers offer more flexibility for complex trim paths.
Related Resources
Need Help Finding the Right Equipment?
Contact our team with your specifications and we'll help you find the right machine.
