Used Industrial Air Compressors & Air Dryers for Sale
Nothing is listed right now — these are machines we've recently sold. or tell us what you need.
Recently sold
SOLDItem #6398
Ingersoll Rand SS5L5 5 HP Air Compressor with Tank
USA
SOLDItem #6660
Van Air 100 SCFM Refrigerated Air Dryer
USA
SOLDItem #6659
Atlas Copco Tank Mounted Rotary Screw Air Compressor
USA
SOLDItem #6362
Ingersoll Rand Air Compressor w/Tank & Air Dryer
USA
SOLDItem #6472
Sullair Rotary Screw Air Compressor, Tank Mounted
USA
SOLDItem #6475
2012 Sullivan Palatek Refrigerated Air Dryer
USA
SOLDItem #6476
Kaeser Rotary Screw Air Compressor
USA
SOLDItem #6474
Sullivan Palatek 50 HP Rotary Screw Air Compressor
USA
SOLDItem #6500
Whitlock Desiccant Dryer
USA
SOLDItem #6490
AEC-Whitlock 30 CFM Desiccant Dryer
USA
SOLDItem #6473
Sullair Refrigerated Air Dryer
USA
SOLDItem #3581
CompAir - L11 - Lubricated Rotary Screw
USA
SOLDItem #5678
Gardner Denver - VS25-40
USA
SOLDItem #5974
Atlas Copco Air Compressor, New in 2020
USA
SOLDItem #5969
Atlas Copco Air Compressor, New in 2019
USA
SOLDItem #5972
Atlas Copco Air Compressor, New in 2017
USA
SOLDItem #5970
Atlas Copco Air Compressor, New in 2019
USA
SOLDItem #5971
Atlas Copco Air Compressor, New in 2018
USA
SOLDItem #5975
Atlas Copco Air Dryer
USA
SOLDItem #5973
Atlas Copco Air Compressor, New in 2022
USA
Item #3292
1999 Sullair LS-10
USA
Item #3570
2013 Kaeser TBH 9
USA
SOLDItem #4572
Ingersoll Rand IRN15H-TAS-100-H
USA
SOLDItem #1714
2004 Airtek ECP250-A2
USA
Air Compressors & Air Dryers by the numbers
From our own catalog: machines listed now and machines we have sold. Updated every few minutes.
Our track record
60 machines sold · 22 makes · model years 1994–2022 · 18 sold at our own auctions
By brand
| Brand | In stock now | Sold by Meadoworks | Model years |
|---|---|---|---|
| Atlas Copco | 0 | 12 | 2000–2022 |
| Ingersoll Rand | 0 | 9 | 1998–1999 |
| Quincy Compressor | 0 | 6 | 1995 |
| Sullair | 0 | 6 | 1999 |
| Kaeser | 0 | 5 | 1997–2013 |
| Airtek | 0 | 3 | 1994–2004 |
Looking for Something Specific?
Most of our inventory sells before we can list it online. If you need a specific brand, model, or specification, tell us what you need—we have access to unlisted equipment and machines coming in from plant closures.
Looking to Sell Your Air Compressors & Air Dryers?
Meadoworks is an active cash buyer of used industrial equipment. Get a free valuation from our AMEA-certified appraisers.
About Used Air Compressors & Air Dryers
Industrial air compressors power tools, actuators, molding machine functions and automation throughout a manufacturing plant. Used air compressors come as rotary screw units (the workhorse for continuous plant air), reciprocating or piston units (intermittent duty and smaller shops) and oil-free machines (food, medical and electronics work where oil carryover is not acceptable). The specifications that matter are horsepower, CFM delivered at working pressure (typically 100-125 PSI), duty cycle, and whether an integrated dryer and receiver tank come with it.
Late-model compressors from plant closures often have low hours and a service history. Ask for the hour meter, the last oil and separator change, and whether the airend has been rebuilt. Pair the compressor with a correctly sized refrigerated or desiccant air dryer to keep moisture out of downstream equipment.
Compressors and dryers we have sold come mostly from molding and manufacturing plants: Atlas Copco, Ingersoll Rand, Quincy, Sullair and Kaeser rotary screw and piston compressors, plus Airtek and Gardner Denver units. Request a quote on any listing or call us at 800-323-0307 for current availability. For rotary screw compressors specifically, see our used rotary screw air compressors page.
How to Choose a Used Industrial Air Compressor
Size it on CFM at your pressure
Add up the air your presses, robots, blow-off and tools use at the pressure they need, then add headroom for leaks and growth. Buy on CFM delivered at that pressure, not on horsepower alone: two 50 HP machines can deliver quite different air.
A plant that runs air all shift wants a rotary screw. A shop that uses air in bursts can live with a piston compressor and a large receiver tank.
Fixed speed, variable speed, and the dryer
A variable-speed (VSD) compressor follows a changing demand and saves power. A fixed-speed machine is simpler and cheaper to buy, and works well as the base-load unit with a VSD trimming on top.
Compressed air leaves the compressor wet. A refrigerated dryer covers most plant air; a desiccant dryer is for low dew points, outdoor lines and sensitive molds. Budget the dryer, filters and receiver with the compressor.
Industrial Air Compressor Specs to Compare
| Spec | Typical range | Why it matters |
|---|---|---|
| Horsepower (HP) | About 10–200 HP in plant use | Sets the size class and the electrical service the compressor needs. |
| CFM at pressure | The air you actually get. Compare machines at the same PSI. | |
| Pressure (PSI) | Usually 100–125 PSI | Higher pressure costs power. Run the lowest pressure your equipment needs. |
| Hours | Hours on the airend and when it was last rebuilt matter more than the year. | |
| Voltage | Usually 460V three-phase | Match it to your plant service before you buy. |
Horsepower (HP)
Typical range: About 10–200 HP in plant use
Sets the size class and the electrical service the compressor needs.
CFM at pressure
The air you actually get. Compare machines at the same PSI.
Pressure (PSI)
Typical range: Usually 100–125 PSI
Higher pressure costs power. Run the lowest pressure your equipment needs.
Hours
Hours on the airend and when it was last rebuilt matter more than the year.
Voltage
Typical range: Usually 460V three-phase
Match it to your plant service before you buy.
What to Inspect on a Used Industrial Air Compressor
Read the hour meter
Ask for total hours and loaded hours, and when the airend was last rebuilt.
Check oil and separator service
Ask for the last oil, filter and separator change. Dark, burnt oil or oil carryover in the air is a warning.
Run it loaded
Listen for bearing noise from the airend and motor and watch the discharge temperature.
Look at the controller
Note any fault history and whether the controller can sequence with your other compressors.
Confirm what comes with it
Dryer, receiver tank, filters and drains are often sold separately.
Related Equipment
- Used Rotary Screw Compressors
The continuous-duty plant-air compressor
- Used Air Dryers
Dry the air before it reaches tools and molds
More in Plant & Material Handling
Types of Plant Support Equipment
Common Applications
Frequently Asked Questions
How much does a used industrial air compressor cost?
Typical used-market ranges: smaller rotary screw compressors (10–30 HP) about $3,000–$10,000, and large plant-air machines (100+ HP) with integrated dryers about $15,000–$50,000+. Reciprocating compressors run about $1,000–$8,000. Horsepower, CFM, hours, variable-speed drive and whether a dryer and tank are included move the price. These are typical ranges, not a quote on any listing — contact Meadoworks at 800-323-0307.
What should I check on a used rotary screw air compressor?
Check the hour meter and the loaded-hours reading, the date of the last oil, filter and separator service, and whether the airend has ever been rebuilt. Confirm the voltage and phase match your plant, look for oil leaks around the airend and cooler, and ask whether a dryer and receiver tank are included.
Rotary screw vs reciprocating air compressor — which do I need?
Rotary screw compressors are built for continuous duty and are the standard choice for plant air in manufacturing. Reciprocating (piston) compressors suit intermittent use but wear quickly under continuous load. If your plant runs compressed air all shift, choose a rotary screw.
How much air does my plant need?
Add the CFM of each user at its working pressure — molding machines, robots, blow-off, tools — and add 20–30% for leaks and growth. If you already run compressors, a short air audit or the controller's load history gives the real number.
Do I need an air dryer with my compressor?
Almost always. Compressed air carries water that rusts lines and spoils parts. A refrigerated dryer covers most plant air; a desiccant dryer is for low dew points and outdoor or cold lines.
How many hours is too many on a used rotary screw compressor?
There is no single cutoff. A well-serviced airend often runs a long time before a rebuild; ask for loaded hours and the rebuild history, and budget a rebuild on a high-hour machine.
Related Resources
Need Help Finding the Right Equipment?
Contact our team with your specifications and we'll help you find the right machine.