Used Hot Runner Systems & Controllers for Sale
Recently sold
SOLDItem #6821
DME 2-Zone Portable Hot Runner Mainframe
USA
SOLDItem #6733
DME Lot of (2) Smart Series Hot Runner Controller Mainframes on Rolling Stand
USA
SOLDItem #6734
DME 12-Zone Hot Runner Controller
USA
SOLDItem #6736
DME 12-Zone Hot Runner Controller Mainframe
USA
SOLDItem #6737
DME 11-Zone Smart Series Hot Runner Controller
USA
SOLDItem #6843
Arburg Lot of (9) Thermonic Temperature Control Modules
USA
SOLDItem #6735
MCE 12-Zone Hot Runner Controller on Mobile Stand
USA
SOLDItem #6822
DME Lot of (10) Smart Series Hot Runner Control Modules
USA
SOLDItem #6738
DME 2-Zone Hot Runner Controller
USA
SOLDItem #6871
Gammaflux Hot Runner Controller Mainframes on Rolling Stand
USA
SOLDItem #6873
Mold-Masters TempMaster M2 Hot Runner Controller w/Touchscreen
USA
SOLDItem #6872
Gammaflux Hot Runner Controller w/Touchscreen Display on Cart
USA
SOLDItem #6064
2023 Husky 12-Zone Hot Runner Controller
USA
SOLDItem #6063
2023 Husky 12-Zone Hot Runner Controller
USA
SOLDItem #6524
Ewikon Hot Runner Controller
USA
SOLDItem #6495
Mold-Masters Hot Runner Controller
USA
SOLDItem #6496
DME 12-Zone Hot Runner Controller (11 Cards)
USA
SOLDItem #6515
2022 Plastic Process Equipment 24-Zone Hot Runner Temperature Control
USA
SOLDItem #6477
Plastic Process Equipment 8-Zone Hot Runner Controller (6 Cards)
USA
SOLDItem #6494
Dynisco 8-Zone Hot Runner Controller (6 Cards)
USA
SOLDItem #6560
DME 16-Zone Valve Gate Controller w/Hydraulic Power Unit
USA
SOLDItem #6164
Husky 80-Zone Hot Runner Controller, New in 2019
USA
SOLDItem #6162
Husky Hot Runner Controller, New in 2024
USA
SOLDItem #6163
Husky 80-Zone Hot Runner Controller, New in 2019
USA
Hot Runner Systems & Controllers by the numbers
From our own catalog: machines listed now and machines we have sold. Updated every few minutes.
Our track record
101 machines sold · 17 makes · model years 2001–2024 · 37 sold at our own auctions
By brand
| Brand | In stock now | Sold by Meadoworks | Model years |
|---|---|---|---|
| Gammaflux | 3 | 14 | 2001 |
| Husky | 2 | 19 | 2019–2024 |
| DME | 1 | 33 | — |
| Mold-Masters | 1 | 3 | — |
| Control King | 1 | 0 | — |
| PETS | 0 | 7 | — |
| Dynisco | 0 | 6 | — |
| Incoe | 0 | 4 | — |
Looking for Something Specific?
Most of our inventory sells before we can list it online. If you need a specific brand, model, or specification, tell us what you need—we have access to unlisted equipment and machines coming in from plant closures.
Browse Used Hot Runner Systems & Controllers by Brand
Browse Used Hot Runner Systems & Controllers by Country
Looking to Sell Your Hot Runner Systems & Controllers?
Meadoworks is an active cash buyer of used industrial equipment. Get a free valuation from our AMEA-certified appraisers.
About Used Hot Runner Systems & Controllers
Hot runner systems and controllers maintain molten plastic in the runner system between shots, eliminating cold runner waste and reducing cycle times. Used hot runner controllers regulate temperature zones in the hot runner manifold and nozzles. Mold-Masters (also known as Mold Masters, MoldMasters, or Mold Master) is the world's largest hot runner manufacturer.
Husky hot runner controllers are the industry standard for PET preform and closure molding. Used hot runner systems include complete manifolds with nozzles and controllers.
Meadoworks stocks used hot runner controllers, Mold-Masters systems, Husky hot runner controllers, Synventive systems, and other hot runner equipment. Contact us at 800-323-0307.
Hot runner controllers are chosen by zone count, thermocouple type (J or K) and connector standard, which must match your molds' wiring. Modular mainframes let you add zones; newer controllers add diagnostics such as heater and thermocouple fault detection and wiring checks. When buying used, check each zone card, the power switching (triac/SSR), cables and connectors.
How to Choose a Used Hot Runner System
Manifold, nozzles, controller
A hot runner keeps the runner molten so the next shot does not mold a cold runner. You are buying a manifold, the nozzles, and a controller that holds each zone. A controller without the manifold is a box of zones. A manifold without a controller you can run is a cold block of steel.
Zones have to match. A 12-zone controller on an 8-drop manifold can work. An 8-zone controller on a 16-drop manifold cannot.
It is not the mold temperature
The hot runner is the melt path. A water temperature controller holds the mold steel. You usually need both, and they are different machines. Nozzle tip style and the gate have to match the resin and the tool you will hang this in.
Thermocouples and heaters fail first. A zone that will not come up is an open heater or a dead couple, and the part will show it.
By size: Typical Used Hot Runner System Price Ranges
1–12 zone controllers: $500–$3,000
16–48 zone mainframes: $3,000–$12,000
64+ zone mainframes and complete systems: $8,000–$20,000+
What moves the price — zone count, card type and how many cards are in the frame, touchscreen or not, cables included, and whether every zone heats and reads.
These are typical used-market ranges, not a quote on any machine. For a current figure on a specific machine, request a quote or call 800-323-0307.
Hot Runner System Specs to Compare
| Spec | Typical range | Why it matters |
|---|---|---|
| Zones | About 2–96 zones | Controller channels versus drops on the manifold. They have to cover every nozzle. |
| Drops | The cavities this manifold feeds. A different cavity count needs a different manifold. | |
| Voltage | 240 V per zone; 208–480 V supply | Heaters and the controller. A mismatch will not hold temperature. |
| Gate | Open tip or valve gate | Tip and gate style for the resin. A valve gate is a different manifold from an open tip. |
Zones
Typical range: About 2–96 zones
Controller channels versus drops on the manifold. They have to cover every nozzle.
Drops
The cavities this manifold feeds. A different cavity count needs a different manifold.
Voltage
Typical range: 240 V per zone; 208–480 V supply
Heaters and the controller. A mismatch will not hold temperature.
Gate
Typical range: Open tip or valve gate
Tip and gate style for the resin. A valve gate is a different manifold from an open tip.
What to Inspect on a Used Hot Runner System
Power each zone
Heater resistance and a thermocouple that reads. A dead zone is the inspection.
Count drops
Against the mold you will put this in.
Look at the tips
Wear and the gate. A damaged tip is a string or a blush.
Match the controller
Zones, voltage, and cables that actually plug into this manifold.
Related Equipment
- Water Temperature Controllers
Hold the mold at a setpoint
Types of Plastic Auxiliary Equipment
Common Applications
Frequently Asked Questions
How much does a used hot runner controller cost?
Used hot runner controller prices range from $500-$3,000 for small zone controllers to $5,000-$20,000+ for large multi-zone systems. Complete hot runner manifold and nozzle systems cost more. Mold Masters and Husky hot runner controllers are the most common brands. Contact Meadoworks at 800-323-0307.
How many zones does my hot runner controller need?
One zone per heated element — each nozzle plus each manifold heater. Count the zones on your largest mold and allow a few spares.
Will a used hot runner controller work with my molds?
It will if the thermocouple type (J or K), connectors and wiring standard match your molds; adapter cables can bridge some differences.
Which hot runner controller brands has Meadoworks sold most?
DME, Husky and Gammaflux, then PETS and Dynisco. The brand table on this page shows how many of each we have sold and how many are listed now.
Can a DME controller run a mold built for a Husky system?
Often, if the thermocouple type (J or K), the zone count and the connector pinout match. An adapter cable can bridge a pinout difference; a type mismatch reads the wrong temperature.
Related Resources
Need Help Finding the Right Equipment?
Contact our team with your specifications and we'll help you find the right machine.