Skip to main content

Used Plastic Resin Dryers & Desiccant Dryers for Sale


6 results

Plastic Resin Dryers by the numbers

From our own catalog: machines listed now and machines we have sold. Updated every few minutes.

Our track record

292 machines sold · 19 makes · model years 1990–2023 · 38 sold at our own auctions

By brand

BrandIn stock nowSold by MeadoworksModel years
Una-Dyn3231997
Matsui3161993–2020
Novatec2521990–2020
Wittmann182004–2017
Comet Plastic Equipment10—
Conair0741997–2012
AEC-Whitlock034—
Dri-Air0341995–2023
Thoreson McCosh0151995–2022
Maguire0112005–2012
Get alerts about new auxiliary equipment listings by email

Looking for Something Specific?

Most of our inventory sells before we can list it online. If you need a specific brand, model, or specification, tell us what you need—we have access to unlisted equipment and machines coming in from plant closures.

Browse Used Plastic Resin Dryers by Country

Looking to Sell Your Plastic Resin Dryers?

Meadoworks is an active cash buyer of used industrial equipment. Get a free valuation from our AMEA-certified appraisers.

Sell Your Equipment

About Used Plastic Resin Dryers

Plastic resin dryers (also called resin dryers, plastic material dryers, or polymer dryers) remove moisture from hygroscopic plastic resins before processing. Proper drying is critical for part quality — moisture in resins like nylon, PET, polycarbonate, and ABS causes splay, bubbles, and reduced mechanical properties. Desiccant dryers for plastic resin use a desiccant bed to produce extremely dry air (-40°F dew point) for thorough moisture removal.

Used plastic dryers are available as standalone hopper dryers, desiccant dryer systems with multiple hoppers, vacuum dryers, and hot air dryers. Plastic material dryer sizing depends on throughput rate and material drying time.

Meadoworks stocks used resin dryers, plastic dryers, and desiccant dryers for plastics from Novatec, Conair, Wittmann, Motan, Matsui, Dri-Air, and Una-Dyn (Unadyn). Contact us at 800-323-0307.

Size a dryer by throughput and drying time: the hopper should hold your hourly material rate multiplied by the resin's drying time (four hours for nylon or PET means a 50 lb/hr process needs about a 200 lb hopper), and the dryer must deliver that rate at the required dew point. When buying used, confirm the unit reaches -40°F dew point, check the desiccant age, regeneration heaters, process heater and blower, and inspect hoppers and hoses for contamination.

How to Choose a Used Resin Dryer

Desiccant, hot air, or vacuum

Nylon, PET, polycarbonate, and ABS have to be dried or the part splays. A desiccant dryer makes low-dew-point air, about -40 F, and is the machine for those resins. A hot-air dryer only helps a resin that is wet on the surface. A vacuum dryer is a different process with a smaller hopper and a batch cycle.

Hopper size and the drying time set the pounds per hour. A hopper that is too small empties before the resin is dry. A hopper that is too large holds resin long enough to yellow.

The dryer is not the hopper alone

A desiccant system is a wheel or beds, a process heater, and a hopper. Beds that are spent, or a wheel that does not turn, blow shop air through the resin and the nameplate still says desiccant.

Dew point on a real instrument is the test. A heater that works and a dew point that does not is a hot-air dryer.

By size: Typical Used Resin Dryer Price Ranges

Press-side hot air and small desiccant dryers (up to about 50 lb/hr): $1,000–$5,000

Portable desiccant dryers with hopper (about 50–250 lb/hr): $3,000–$15,000

Large desiccant and central drying systems (250+ lb/hr, multiple hoppers): $15,000–$75,000

What moves the price — desiccant style (twin bed or wheel), whether the hopper and loader come with it, controls with dew-point readout, age and whether the unit still reaches about -40 F under load.

These are typical used-market ranges, not a quote on any machine. For a current figure on a specific machine, request a quote or call 800-323-0307.

Resin Dryer Specs to Compare

Type

Typical range: Desiccant on most molding resins; hot air for non-hygroscopic

Desiccant, hot air, or vacuum. The resin picks it. PET and nylon want desiccant.

Throughput (lb/hr)

Typical range: About 25–1,000+ lb/hr

At the drying time that resin needs. The hopper and the blower have to agree.

Dew point

Typical range: About -40 F on a desiccant dryer

The number that means the beds or the wheel still work.

Hopper (lb)

Typical range: About 30–2,000 lb

Has to hold a drying-time worth of resin at your rate.

What to Inspect on a Used Resin Dryer

  • Read dew point

    On a desiccant unit, after it has run. A number near room moisture means the desiccant is done.

  • Turn the wheel or valve

    Beds have to switch. A wheel has to rotate. A stuck valve dries nothing.

  • Heat the process air

    To the resin's drying temperature, not only until the hose is warm.

  • Size the hopper

    Pounds divided by your rate is the hours of drying you actually have.

Related Equipment

Common Applications

Engineering resins
PET processing
Nylon drying
Polycarbonate
ABS
Medical molding

Frequently Asked Questions

How much does a used plastic resin dryer cost?

Typical used-market ranges: press-side hot air and small desiccant dryers (up to about 50 lb/hr) about $1,000–$5,000, portable desiccant dryers with a hopper (about 50–250 lb/hr) about $3,000–$15,000, and large desiccant and central drying systems (250+ lb/hr, multiple hoppers) about $15,000–$75,000. Desiccant style, controls, age and whether the hopper and loader come with it move the price. These are typical ranges, not a quote on any listing — contact Meadoworks at 800-323-0307.

What is a desiccant dryer for plastic resin?

A desiccant dryer uses a desiccant material (molecular sieve) to remove moisture from air before passing it through a hopper of plastic resin. Desiccant dryers for plastics achieve dew points of -40°F or lower, which is necessary for properly drying hygroscopic engineering resins like nylon, PET, PC, and ABS.

What size resin dryer do I need?

Multiply your material rate (lb/hr) by the resin's drying time to get hopper capacity, and choose a dryer rated for at least that rate at the dew point your resin needs.

How often does dryer desiccant need replacing?

Desiccant typically lasts several years but degrades with heat and contamination. If a used dryer can't reach its rated dew point, worn desiccant or a failing regeneration heater is the usual cause.

Which resin dryer brands has Meadoworks sold most?

Conair and Novatec by a wide margin, then AEC-Whitlock, Dri-Air, Una-Dyn, Matsui and Thoreson McCosh. The brand table on this page shows how many of each we have sold and how many are listed now.

Is a used Novatec or Whitlock dryer worth buying?

It can be, if it still reaches its dew point under load and the regeneration heaters work. Both makes have parts available. Ask for the dew-point reading on a running unit, not the nameplate.

Need Help Finding the Right Equipment?

Contact our team with your specifications and we'll help you find the right machine.