Skip to main content

Used Coil Straighteners & Levelers for Sale


See all Coil Processing →

0 results

Get alerts about new stamping press listings by email

Looking for Something Specific?

Most of our inventory sells before we can list it online. If you need a specific brand, model, or specification, tell us what you need—we have access to unlisted equipment and machines coming in from plant closures.

Looking to Sell Your Coil Straighteners & Levelers?

Meadoworks is an active cash buyer of used industrial equipment. Get a free valuation from our AMEA-certified appraisers.

Sell Your Equipment

About Used Coil Straighteners & Levelers

Coil straighteners and levelers remove coil set, crossbow, edge wave, and other flatness defects from coil stock before it enters the stamping press. Standard straighteners use a series of work rolls to progressively remove coil set. Precision levelers (also called precision straighteners or roller levelers) use closely spaced, small-diameter rolls with independent adjustment to eliminate residual stresses and achieve flat, stress-free material.

Key specifications include material width capacity, material thickness range, number of work rolls, roll diameter, roll spacing, and backup roll configuration. Precision levelers are essential when flatness specifications are critical, such as in fine blanking, laser cutting, and precision stamping.

Tell us the width, thickness and material you run and Meadoworks will look for a straightener or leveler that fits. Contact us at 800-323-0307.

How to Choose Used Coil Straighteners & Levelers

Straightener or Precision Leveler

A straightener removes coil set with a few large work rolls and suits most stamping. A precision leveler uses many small rolls with backups and removes crossbow, edge wave and residual stress for laser cutting, fine blanking and flat parts. Size either one to your widest and thickest strip and to the yield strength of the material.

Check the roll count and diameter, the adjustment (individual or tilting), and whether the straightener is a stand-alone unit or a combined straightener-feeder. Rolls that are marked or worn transfer the marks to every part.

By Class: Typical Used Coil Straighteners & Levelers Price Ranges

Stand-alone straighteners up to about 24 in wide: about $3,000–$20,000.

Power straighteners 24–60 in wide: about $15,000–$60,000.

Precision levelers with backup rolls: about $40,000–$250,000.

What moves the price — width and thickness capacity, roll count and diameter, backup rolls, powered or driven rolls, individual roll adjustment, roll condition, and whether a reel and feed come with it.

These are typical used-market ranges, not a quote on any one machine. For a current figure on a specific machine, request a quote or call 800-323-0307.

By brand

The coil handling we have sold so far is Rowe International and Oriimec servo coil feed lines. We have not yet sold a stand-alone straightener or leveler; tell us the width, thickness and material and we will look for one.

Meadoworks track record

Meadoworks' coil handling record is two servo coil feed lines about 50 in wide, from Rowe and Oriimec. Stand-alone straighteners and levelers are listed here when they come in from plant closures.

Coil Straighteners & Levelers Specs to Compare

Material width

Typical range: Often 6–72 in

Sets the widest strip.

Material thickness

Typical range: Often 0.010–0.500 in

Thicker or harder material needs larger rolls and more power.

Work rolls

Typical range: Often 5–7 on straighteners; 13–21 on levelers

More, smaller rolls flatten better.

Roll diameter

Typical range: Often 1–6 in

Smaller rolls work thin material; larger rolls carry heavy gauge.

Backup rolls

Typical range: Usually on precision levelers

Keep small work rolls from bending across the width.

What to Inspect on Used Coil Straighteners & Levelers

  • Run your material

    Straighten a strip and check flatness, crossbow and edge wave.

  • Inspect the rolls

    Look for marks, flats and wear that would print on the strip.

  • Check the adjustment

    Run the roll adjustment through its range and confirm the readouts.

  • Run the drive

    Listen to the gearbox and check the motor under load.

  • Look at the backups

    On levelers, check the backup rolls and bearings.

  • Confirm what comes with it

    Note the reel, feed, loop control and controls included.

Related Equipment

Common Applications

Coil set removal
Precision leveling
Pre-press straightening
Blanking line preparation
Laser cutting preparation

Frequently Asked Questions

What is the difference between a straightener and a leveler?

A straightener (coil straightener) removes coil set — the curvature from being wound on a coil — using a series of work rolls. A leveler (precision leveler or roller leveler) goes further, using closely spaced small-diameter rolls to work the material beyond its yield point, eliminating internal stresses and producing flat, stress-free material. Levelers are required when precision flatness is critical.

How much does a used coil straightener cost?

Typical used ranges run about $3,000–$20,000 for stand-alone straighteners up to about 24 in wide and about $15,000–$60,000 for power straighteners 24 to 60 in wide. Precision levelers with backup rolls run about $40,000–$250,000. Width, thickness, roll count and roll condition move the price; call 800-323-0307 for a current figure.

What should I check on a used straightener or leveler?

Run a strip of your material and check flatness, crossbow and edge wave. Inspect the rolls for marks and flats that would print on the strip, run the adjustment through its range, listen to the drive under load, and on a leveler check the backup rolls and bearings. Confirm which reel, feed and controls come with it.

How many rolls does a coil straightener need?

It depends on the material and the flatness you need. Five to seven work rolls remove coil set on most stamping strip. Thin, high-strength or flatness-critical material needs a precision leveler with 13 or more small work rolls and backup rolls to remove crossbow, edge wave and residual stress.

Can a straightener handle high strength steel?

Only one built for it. High-strength steel needs more force, larger or more rolls and more power to bend past its yield point, so a straightener rated for mild steel at a given thickness handles much thinner high-strength material. Check the rating for your material's yield strength, not just the thickness.

Need Help Finding the Right Equipment?

Contact our team with your specifications and we'll help you find the right machine.