Skip to main content

Used Additional Industrial Equipment for Sale


Recently sold

Used Tool Room EquipmentSOLD

Item #6824

Manual Lever Bench Press w/Fixture

USA

View details
Used Toman Tool 2020 Heat StakersSOLD

Item #6648

Toman Tool Thermal Assembly System / Heat Stake Press

USA

View details
Used Dukane 4070 DPC III Ultra Sonic WeldersSOLD

Item #6652

Dukane Enclosed Ultrasonic Welding Station

USA

View details
Used Weller WES51 Tool Room EquipmentSOLD

Item #6794

Weller Lot of Soldering Stations

USA

View details
Used Itasca Automation Systems P-437 Automation EquipmentSOLD

Item #6655

Itasca Automation Systems Automated Resistance Welding Workstation

USA

View details
Used Tool Room EquipmentSOLD

Item #6829

Lot of Thread Repair Kits and Tap Extractor Set

USA

View details
Used Heat StakersSOLD

Item #6650

Heat Stake Workstation w/Pneumatic Fixture and Dust Collector

USA

View details
Used Itasca Automation Systems Automation EquipmentSOLD

Item #6656

Itasca Automation Systems 8-Station Automatic Coil Winding Machine

USA

View details
Used Toman Tool 2020 Heat StakersSOLD

Item #6649

Toman Tool Thermal Assembly System / Heat Stake Press

USA

View details
Used OTC 4518 Tool Room EquipmentSOLD

Item #6796

OTC Lot of (2) Stinger Bearing Separator / Push-Puller Sets

USA

View details
Used Dukane 220 Ultra Sonic WeldersSOLD

Item #6651

Dukane Ultrasonic Welding Press w/2120 DPC III Generator

USA

View details
Used Marsilli MARS 2-150 Automation EquipmentSOLD

Item #6657

Marsilli Automatic Coil Winding Machine

USA

View details
Used 2KM Star 902A Silicone DispensersSOLD

Item #6732

2KM Two-Component Metering and Mixing System

USA

View details
Used Tool Room EquipmentSOLD

Item #6823

No. 3 Manual Arbor Press w/Hioki RM3544-01 Resistance Meter

USA

View details
Used Vibromatic LP 12 Automation EquipmentSOLD

Item #6889

Vibromatic Vibratory Bowl Feeder w/Pneumatic Heat Stake Station on Steel Table

USA

View details
Used Tool Room EquipmentSOLD

Item #6798

Pegboard w/Hand Tools

USA

View details
Used Tool Room EquipmentSOLD

Item #6838

Mobile Steel Work Bench w/Contents

USA

View details
Used Tool Room EquipmentSOLD

Item #6837

Rolling Tool Cart w/Contents

USA

View details
Used Mag-Torch Tool Room EquipmentSOLD

Item #6795

Mag-Torch Brazing Torch Kit in Case

USA

View details
Used Milwaukee 6230 Tool Room EquipmentSOLD

Item #6830

Milwaukee Lot of Portable Bandsaw, Right Angle Drill and Fish Tape

USA

View details
Used Tool Room EquipmentSOLD

Item #6793

Heavy Duty Steel Workbench w/5-1/2 in Bench Vise and Contents

USA

View details
Used Wissota E-7 Tool Room EquipmentSOLD

Item #6792

Wissota 7 in Double-End Bench Grinder w/Pedestal

USA

View details
Used 2020 Vestil P-HOP-1.0 Containers & TotesSOLD

Item #6845

2020 Vestil 2,000 lb Forklift Dump Hopper Container Or Tote

USA

View details
Used 2020 Vestil P-HOP-1.5 Containers & TotesSOLD

Item #6846

2020 Vestil 2,000 lb Forklift Dump Hopper Container Or Tote

USA

View details

Additional Industrial Equipment by the numbers

From our own catalog: machines listed now and machines we have sold. Updated every few minutes.

Our track record

76 machines sold · 36 makes · model years 1992–2020 · 52 sold at our own auctions

By brand

BrandIn stock nowSold by MeadoworksModel years
Siocast202023
Fluid Automation14—
Branson13—
Edge112018
AirClean Systems10—
Belco Packaging Systems10—
California Vibratory Feeders10—
Clean Air Products10—
Farrel10—
Hermann102006
Get alerts about new auxiliary equipment listings by email

Looking for Something Specific?

Most of our inventory sells before we can list it online. If you need a specific brand, model, or specification, tell us what you need—we have access to unlisted equipment and machines coming in from plant closures.

Looking to Sell?

Meadoworks is an active cash buyer of used industrial equipment. Get a free valuation from our AMEA-certified appraisers.

Sell Your Equipment

About Used Additional Industrial Equipment

Additional equipment is the catch-all for machines that sit around a production floor and do not belong in one process family. Plastics assembly and welding covers ultrasonic welders, heat stakers and dispensing systems that join molded parts after they leave the press. A 3D printer, plastic or metal, is a prototyping or short-run tool, not a substitute for the molding machine beside it.

Converting and laminating covers laminators, coating lines and slitter rewinders for film, sheet and web. Industrial ovens and heat treating covers batch ovens, furnaces and induction heating used to cure, dry or harden a part the process machine already made. Packaging and labeling covers stretch wrappers, labelers, palletizers and case tapers at the end of the line.

Screws, barrels and spare parts are the wear items for an extruder or a molding machine: the screw, the barrel, and the lots of components that come out of a closure. Shop and facility equipment is the furniture of the building: workbenches, cabinets, racks, ladders, carts and fume hoods. Tooling and workholding is vises, chucks, bar feeders and tool holders, the pieces a machining center needs before it can cut.

None of these groups replace the press, the extruder or the machining center. They are the surrounding steps that let that machine ship a finished part instead of a half-done one. Buying used additional equipment is usually a hunt for one of these groups, because a cell is short a welder, a wrapper or a screw, not because someone set out to collect miscellaneous iron.

Meadoworks lists this equipment from the same plant closures, consignments and auctions as the production machines. Buyers who already know the missing step should go straight to that group rather than treat this range as one machine type. A closure often includes the welder, the oven and the stretch wrapper along with the presses. The nameplate carries the group and the basic size or capacity, and buyers can inspect before they commit. Rigging is coordinated with the rest of the load when the machine is heavy enough to need it, and smaller cabinets ship with the cell instead of as a second project.

How to Choose Used Additional Industrial Equipment

How to Choose Among Plastics Assembly, Packaging and Shop Gear

Decide which job is unfinished. If molded parts still need to be joined, you are in plastics assembly: ultrasonic welding for a joint, a heat staker for a post, a dispenser for a bead of adhesive or gasket. If parts are finished and need to leave the dock, you are in packaging: a stretch wrapper, a case taper, a labeler or a palletizer. If the room cannot support the work, you are in shop equipment: a bench, a hood, a rack or a cart.

Do not buy a 3D printer to avoid a mold, and do not buy an oven to avoid a temperature controller on the mold. Those are different jobs. Match the group to the step that is actually missing, then read that group's specs. This overview only sorts the machines.

When a Spare Screw or a Bar Feeder Belongs in the Same Purchase

A screw and barrel wear out on a schedule the press does not. If you are buying an extruder or a molding machine from a closure, look at the spare screw in the same sale before you price a new one. A bar feeder belongs with a lathe, not in a pile of miscellaneous cabinets. Workholding belongs with the machining center that will use the vise.

Buying them in the same lot saves a second round of sourcing. Buying them with no machine in mind fills a mezzanine. Name the machine the accessory serves, confirm the interface, and then decide. Voltage, flight length and collet size are the facts. The word accessory is not.

By Class: Used Price Ranges and Our Track Record

Ultrasonic welders and heat stakers: the welders we have sold are Branson welders and Dukane welding presses, and the Branson 2000Xea we have listed is rated 20 kHz and 2,500 watts; Toman Tool heat stake presses sit in the same group. Used, about $2,000–$15,000 for a press and stand, more for an enclosed station.

Ovens, furnaces and induction heating: Typical range on what we have handled: a 5 kW Pillar induction brazing system up to a CM Furnaces furnace rated 1,200°C, with Blue M batch convection ovens and a Lyle Industries vertical pre-heat oven in between. Used, about $2,000–$20,000.

Dispensing and metering: Graco, Fluid Automation and EFD dispensers and a 2KM two-component metering system. Used, about $1,000–$15,000.

Packaging: a TLM horizontal flow wrapper and a Belco tray sealer. Used, about $10,000–$60,000 for a flow wrapper or sealer.

Bar feeders and shop equipment: LNS and Edge bar feeders, about $3,000–$15,000; fume hoods, benches, lockers and cabinets, about $200–$5,000.

What moves the price: age, controls, voltage, whether tooling, horns or fixtures come with the machine, and how hard it is to rig. These are typical used-market ranges, not a quote on any one machine. For a current price on a specific machine, request a quote or call 800-323-0307.

What to Inspect on Used Additional Industrial Equipment

  • Name the machine it serves

    A welder, bar feeder, screw or vise has to fit the press, lathe or part it is bought for, so confirm the interface first.

  • Power it up

    Run the welder, oven, wrapper or dispenser under power and watch a full cycle before you price it.

  • Check voltage and phase

    Many of these units are single-phase shop gear, others need 460V three-phase, so match them to the outlet they will use.

  • Look at the wear parts

    Horns and boosters on a welder, heating elements on an oven, prestretch rollers on a wrapper and the flights on a screw are the usual replacements.

  • Confirm what comes with it

    Fixtures, horns, nozzles, manuals and controls change the value more than the paint does.

Related Equipment

Additional Industrial Equipment Brands We've Sold

Common Applications

Joining molded plastic parts
Prototyping and short-run builds
Film and sheet converting
Curing and heat treating
End-of-line pallet wrapping
Extruder screw and barrel replacement
Machine vise and chuck setup
Shop benches and fume control

Frequently Asked Questions

What counts as additional equipment?

Anything on a plant floor that is not the main process machine and is not already filed under plastics auxiliary, CNC, fabrication or metal forming. That means plastics assembly and welding, 3D printers, converting and laminating, ovens and heat treating, packaging and labeling, screws and barrels, shop and facility gear, and tooling and workholding. Each of those is its own group once you know which step you are buying for. This overview is the index.

Is an ultrasonic welder additional equipment or plastics auxiliary?

Here it is plastics assembly, inside additional equipment, because it joins parts after molding rather than drying, loading or cooling the resin. Plastics auxiliary means the equipment that prepares material and controls the mold: dryers, loaders, chillers and thermolators. A welder, a heat staker and a dispenser sit after the press. If you are building a cell, buy the auxiliary with the press and the welder for the joint the part still needs.

Should I buy a 3D printer or a mold for a new part?

Buy the printer when you need a handful of pieces, a fit check, or a shape that will change next month. Buy the mold and a press when you need hundreds or thousands of the same part in a production resin. A printer does not replace a thermolator, a dryer or a machining center. Metal printers and plastic printers are different machines. Match the process, FDM, resin or powder, to the material the part has to be, not to the novelty of the machine.

What should I look for on a used stretch wrapper?

Confirm whether the load turns or the arm turns, and whether an operator has to attach the film. Then look at the prestretch rollers, the mast and carriage, and the cut-and-wipe if the machine claims to be automatic. A turntable bearing that growls is a lift-the-table repair. Controls from the last fifteen years are easier to support than a relay panel. Match throughput, loads per hour, before you match the paint.

Why buy additional equipment from a plant closure?

A closure sells the machines that actually ran together. The welder, the oven, the wrapper and the spare screw often leave with the press, and the interfaces are the ones that plant already solved. You still inspect each piece. A matched cell can save a second truck and a week of guessing at voltage and mounting. Meadoworks lists those lots from closures, consignments and auctions, with the machine group named so you can find the welder without reading past the presses.

How much does used additional equipment cost?

It depends on the group more than anything else. Shop gear such as fume hoods, benches and lockers often sells for a few hundred to a few thousand dollars. A used ultrasonic welder with its stand usually runs about $2,000–$15,000, a bar feeder about $3,000–$15,000, and a flow wrapper or tray sealer more. Age, controls, voltage and the tooling that comes with the machine move the number. These are typical used-market ranges. For a current price on a specific machine, request a quote or call 800-323-0307.

Shop Used Additional Industrial Equipment by Type