Skip to main content

Used Extruder Screws & Barrels for Sale


See all Screws, Barrels & Spare Parts →

0 results

Get alerts about new extrusion listings by email

Looking for Something Specific?

Most of our inventory sells before we can list it online. If you need a specific brand, model, or specification, tell us what you need—we have access to unlisted equipment and machines coming in from plant closures.

Browse Used Extruder Screws & Barrels by Brand

Looking to Sell Your Extruder Screws & Barrels?

Meadoworks is an active cash buyer of used industrial equipment. Get a free valuation from our AMEA-certified appraisers.

Sell Your Equipment

About Used Extruder Screws & Barrels

Extruder screws and barrels are the core processing components of any plastic extruder. Used extruder screws and barrels offer significant savings over new replacements, which can cost $10,000-$100,000+ depending on size and material. Meadoworks stocks used screws and barrels for single screw extruders, twin screw extruders, and injection molding machines.

Key specifications include screw diameter, L/D ratio, metallurgy (nitrided steel, bimetallic, tool steel), flight geometry (metering, barrier, mixing), and wear condition. Barrel liners may be bimetallic (Xaloy, Bernex) or nitrided.

Contact Meadoworks at 800-323-0307 for used extruder screw and barrel availability.

How to Choose a Used Extruder Screw and Barrel

Match the machine you already have

A screw and a barrel are wear parts for a known extruder or a known molding press. Diameter, L/D, and the shank or the drive connection have to match that machine. A screw that is the right diameter and the wrong spline does not go in. Measure the machine, then shop the screw.

Metallurgy is the life. Nitrided steel is the ordinary screw. Bimetallic barrels and harder flights are what filled and corrosive resins need. A nitrided screw in a glass-filled compound is a short life.

Wear you can measure

Flight land and barrel bore are measured in thousandths. A screw that looks shiny can be undersize. Ask for the measurements or plan to mike it. A barrel liner from Xaloy or a similar maker is a different part from a nitrided barrel. Know which you need before you compare prices in your head.

Flight geometry, barrier or mixing, has to suit the resin. A general-purpose screw is not a compounding screw.

By size: Typical Used Extruder Screw and Barrel Price Ranges

1.5–2.5 in (38–65 mm): about $2,000–$10,000

3–4.5 in (75–115 mm): about $8,000–$30,000

6 in (150 mm) and up: about $20,000–$80,000+

Diameter and L/D, flight and barrel-liner metallurgy (bimetallic barrels, hard-faced flights), measured wear, mixing sections and whether the pair fits a common extruder move the price.

These are typical used-market ranges, not a quote on any machine. For a current figure on a specific machine, request a quote or call 800-323-0307.

By brand

Machine makers: Screws and barrels made by Milacron, Davis-Standard, Welex, NRM and Berstorff fit their own extruders.

Screw shops: Most replacement screws come from screw shops such as Glycon, Xaloy and Reiloy, built to the machine's barrel.

Meadoworks track record

Meadoworks has sold more than 60 used extrusion machines and lines, and screws and barrels often come with them. Loose screws and barrels come up less often; tell us the extruder make, diameter and L/D and we will look for a fit.

Extruder Screw and Barrel Specs to Compare

Diameter (in or mm)

Typical range: About 1.5–6 in (38–150 mm)

Has to match the machine. Close is not the same bore.

L/D

Typical range: Usually 24:1 to 36:1

Has to match the barrel length. A long screw in a short barrel does not fit.

Flight hardness

Nitrided versus a harder facing. Filled resins eat the soft one.

Shank

The drive end has to couple. A pretty flight with the wrong shank is scrap.

What to Inspect on a Used Extruder Screw and Barrel

  • Mike the flights

    Compare to the barrel bore. The clearance is the wear.

  • Look for a crack at the root

    Especially behind a mixer. A cracked screw will not be welded into a reliable one.

  • Match the shank

    Spline, key, or bolt circle against the gearbox or the injection unit.

  • Name the resin

    A screw from a glass-filled job may already be at the end of its life even if it looks full.

Related Equipment

Common Applications

Replacement parts
Extruder upgrades
Process optimization
Emergency replacements

Frequently Asked Questions

How much do used extruder screws and barrels cost?

Used extruder screw and barrel prices range from $2,000-$10,000 for small diameter sets to $20,000-$80,000+ for large production extruder screws. Pricing depends on diameter, L/D ratio, metallurgy, and wear condition. Used screws and barrels offer 50-70% savings over new replacements. Request a quote on any listing or call 800-323-0307 for a current price.

How do I measure wear on a used extruder screw?

Measure the flight outside diameter at several points and compare it with the barrel bore; the difference is the flight clearance. Clearance well above the new spec (often about 0.005 in per inch of diameter) costs output and melt quality.

Will a used screw fit my extruder?

Match the diameter, L/D, shank and keyway (drive end), the screw's overall length and the feed throat position. A screw from the same extruder model is the simplest fit.

What is a bimetallic barrel?

A steel barrel lined with a hard, wear-resistant alloy (iron-boron, or tungsten carbide for glass-filled and abrasive resins). It lasts several times longer than a nitrided barrel and is worth paying for when you run filled compounds.

Should I buy a used screw or rebuild mine?

If your barrel is in spec, a rebuilt or used screw that matches it is usually cheapest. If the barrel is worn too, a matched used screw-and-barrel set or a new pair is the better buy.

Need Help Finding the Right Equipment?

Contact our team with your specifications and we'll help you find the right machine.