Used Film Extrusion Lines for Sale
All used plastic extruders & extrusion equipment (14) →
See all 14 Extruders & Extrusion Lines →
4 results

Item #6617
2012 Addex 4.5" Blown Film Extrusion Line
Canada

Item #6618
2006 Zocchi 3-Layer Co-Extrusion Blown Film Line
Canada

Item #6616
Addex 4.5" Blown Film Extrusion Line
Canada

Item #6615
AR Engineering 4.5" Blown Film Extrusion Line
Canada
Film Extrusion Lines by the numbers
From our own catalog: machines listed now and machines we have sold. Updated every few minutes.
By brand
| Brand | In stock now | Sold by Meadoworks | Model years |
|---|---|---|---|
| Addex | 2 | 0 | 2002–2012 |
| AR Engineering | 1 | 0 | 2002 |
| Zocchi | 1 | 0 | 2006 |
Looking for Something Specific?
Most of our inventory sells before we can list it online. If you need a specific brand, model, or specification, tell us what you need—we have access to unlisted equipment and machines coming in from plant closures.
Browse Used Film Extrusion Lines by Brand
Browse Used Film Extrusion Lines by Country
Looking to Sell Your Film Extrusion Lines?
Meadoworks is an active cash buyer of used industrial equipment. Get a free valuation from our AMEA-certified appraisers.
About Used Film Extrusion Lines
Film extrusion lines produce plastic film through either blown film extrusion or cast film extrusion processes. Blown film extruder machines extrude a tube of plastic that is inflated into a bubble, cooled, collapsed, and wound — producing film for bags, packaging wrap, agricultural film, and construction film. Cast film lines extrude through a flat die onto chill rolls for optical clarity applications.
Used blown film lines include the extruder, blown film die (annular), air ring, cooling tower, collapsing frame, nip rolls, winder, and often inline printing or converting equipment. Lab scale blown film plants are available for R&D and pilot-scale development.
Meadoworks stocks used film extrusion lines from Davis-Standard, Gloucester, Alpine, Windmoeller & Hoelscher, Reifenhauser, Macro Engineering, and Brampton Engineering. Contact us at 800-323-0307 for blown film extruder machine pricing.
How to Choose a Used Film Extrusion Line
Blown or cast
Blown film goes up from an annular die and an air ring, then through a collapsing frame to a winder. Cast film goes from a flat die onto a chill roll. They make different film and they are not the same used machine with a setup change. Grocery sacks and stretch film do not come off the same line.
Die diameter, or die width on a cast line, sets the layflat or the web. Output follows the extruder. A line quoted in pounds per hour only means something in the resin and the thickness you run.
Air, cooling, and the winder
On blown film the air ring and internal bubble cooling, if it has it, are the rate and the gauge. A tired blower or a damaged ring is a film that will not hold. On cast film the chill roll finish and temperature are the clarity. Winders that will not hold tension make scrap even when the die is perfect.
Treat the extruder, the die, and the winder as one line. Missing any of them is a project, not a running film line.
By size: Typical Used Film Extrusion Line Price Ranges
Lab and small single-layer blown film lines: about $30,000–$100,000
Production single- and 3-layer lines: about $100,000–$400,000
Wide multi-layer co-extrusion lines: about $300,000–$1,000,000+
Layer count, die size and lay-flat width, extruder sizes, the air ring and IBC, the winder, gauge control and age move the price.
These are typical used-market ranges, not a quote on any machine. For a current figure on a specific machine, request a quote or call 800-323-0307.
Meadoworks track record
Meadoworks has sold more than 60 used extrusion machines and lines. Film lines we have listed include Addex and AR Engineering 4.5-inch blown film lines and a Zocchi 3-layer co-extrusion blown film line, built from 2002 to 2012.
Film Extrusion Line Specs to Compare
| Spec | Typical range | Why it matters |
|---|---|---|
| Die size | Diameter on blown film, width on cast. This is the web you can make. | |
| Layers | 1–3 layers on many used lines | A mono line will not make a barrier film. Coex needs a die and extruders that match. |
| Output (lb/hr) | Only in your resin and gauge. A nameplate in a different resin is a guess. | |
| Winder | Surface or center wind, and the maximum roll diameter, decide whether the film can ship. |
Die size
Diameter on blown film, width on cast. This is the web you can make.
Layers
Typical range: 1–3 layers on many used lines
A mono line will not make a barrier film. Coex needs a die and extruders that match.
Output (lb/hr)
Only in your resin and gauge. A nameplate in a different resin is a guess.
Winder
Surface or center wind, and the maximum roll diameter, decide whether the film can ship.
What to Inspect on a Used Film Extrusion Line
Identify blown or cast
Annular die and a tower, or a flat die and a chill roll. Do not mix the words.
Inspect the die
Lips, spiral or coat-hanger flow, and heaters. A damaged lip is a gauge band.
Run the air or the chill roll
Blower and ring on blown film. Temperature and finish on a cast roll.
Watch the winder
Tension, the knife, and whether a roll will build without telescoping.
Related Equipment
- Desiccant Dryers
Dry the resin before it reaches the screw
More Extruders & Extrusion Lines types
Types of Extrusion
Common Applications
Frequently Asked Questions
What is a blown film extruder?
A blown film extruder extrudes molten plastic through an annular die to form a tube that is inflated with air into a thin-walled bubble. The bubble is cooled by an air ring, collapsed, and wound into rolls of flat film. Blown film extrusion is the most common process for producing LDPE, LLDPE, and HDPE films for packaging.
How much does a used blown film line cost?
Used blown film extruder machine prices range from $40,000-$100,000 for small single-layer lines to $200,000-$1,000,000+ for large multi-layer co-extrusion blown film lines. Lab scale blown film plants start around $30,000-$60,000. Contact Meadoworks at 800-323-0307.
What is the difference between blown and cast film?
A blown film line extrudes a tube through a ring die and inflates it into a bubble, which gives a tough, balanced film for bags and liners. A cast film line extrudes flat through a slot die onto a chilled roll, which gives a clear, flat film for packaging and stretch wrap.
What should I inspect on a used blown film line?
The die and air ring, the internal bubble cooling (IBC) if fitted, the extruder screws and gearboxes, the collapsing frame and nip rolls, and the winder. Ask for the lay-flat width, gauge range and output it last ran.
What brands make blown film lines?
Addex, AR Engineering and Zocchi are film line makes Meadoworks has listed. Battenfeld Gloucester, Windmöller & Hölscher, Reifenhäuser and Macro Engineering are also common on the used market.
Related Resources
Need Help Finding the Right Equipment?
Contact our team with your specifications and we'll help you find the right machine.