Skip to main content

Used Accumulator Head Blow Molding Machines for Sale

All used blow molding machines (15) →


See all 15 Blow Molding Machines →

3 results

Accumulator Head Blow Molding Machines by the numbers

From our own catalog: machines listed now and machines we have sold. Updated every few minutes.

Spec ranges across our machines

SpecRangeMachines
Clamp force25–180 tons6
Platen size (first figure)16–111 in6
Get alerts about new blow molding listings by email

Looking for Something Specific?

Most of our inventory sells before we can list it online. If you need a specific brand, model, or specification, tell us what you need—we have access to unlisted equipment and machines coming in from plant closures.

Browse Used Accumulator Head Blow Molding Machines by Brand

Browse Used Accumulator Head Blow Molding Machines by Country

Looking to Sell Your Accumulator Head Blow Molding Machines?

Meadoworks is an active cash buyer of used industrial equipment. Get a free valuation from our AMEA-certified appraisers.

Sell Your Equipment

About Used Accumulator Head Blow Molding Machines

Accumulator head blow molding machines use a large accumulator chamber to collect molten plastic before rapidly pushing it through the die to form a heavy parison. This allows production of large, heavy parts that continuous extrusion machines cannot handle. Accumulator head machines produce industrial drums (55-gallon and larger), automotive fuel tanks, large water tanks, kayaks, and other oversized hollow plastic parts.

Key specifications include accumulator volume (shot size), head configuration (single or dual), parison programming capability, and clamp tonnage. Multi-head accumulator machines can produce very large parts or multiple smaller parts per cycle.

Meadoworks stocks used accumulator head blow molding machines from Graham Engineering, Uniloy, Kautex, and Bekum. Contact us at 800-323-0307.

How to Choose a Used Accumulator Head Blow Molding Machine

A heavy parison

An accumulator stores melt and shoots it through the die as one heavy parison. That is how you blow a drum, a tank, a kayak, or a large industrial part that a continuous bottle head cannot hang. Shot size, in pounds, is the spec. A head rated for 5 pounds will not drop a 20-pound parison.

Clamp and daylight have to take the mold for that part. These machines are large. The platen and the shot have to agree.

Programming and the push-out

Parison programming points let you thicken the wall where the part needs it and thin it where it does not. More points are more control. The push-out cylinder and the die/pin condition decide whether that program actually lands. A scored die makes a streak no program will hide.

First-in, first-out heads and older designs age differently. Ask which head it is, and when the die and pin were last measured.

By size and shot weight: Typical Used Accumulator Head Blow Molding Machine Price Ranges

Up to about 10 lb shot: about $50,000–$200,000

About 10–50 lb shot: about $100,000–$400,000

50 lb shot and up (industrial and fuel-tank machines): about $200,000–$750,000+

Shot weight, platen size and clamp force, parison programming points, multi-layer capability, the molds included and age move the price.

These are typical used-market ranges, not a quote on any machine. For a current figure on a specific machine, request a quote or call 800-323-0307.

By brand

Sterling: Accumulator-head blow molders; the accumulator make we have handled most.

Cincinnati Milacron and Uniloy: Industrial accumulator machines common on the used market; we have handled Milacron.

Davis-Standard: Accumulator heads and extruders; we have handled Davis-Standard.

Kautex and Graham: Large industrial and fuel-tank blow molders.

Meadoworks track record

Meadoworks has sold more than 85 used blow molding machines. Accumulator-head machines we have handled include Sterling (most), Cincinnati Milacron and Davis-Standard.

Accumulator Head Blow Molding Machine Specs to Compare

Shot (lb)

The heaviest parison. Your part has to fit under it with flash you can trim.

Clamp (tons)

Large molds need the force and the platen. Measure both.

Programming points

Wall control. A shaped tank without points is a heavy, uneven tank.

Head count

One head for one large part. Dual heads are a different layout.

What to Inspect on a Used Accumulator Head Blow Molding Machine

  • Cycle a push-out

    The accumulator should fill and shoot smoothly. A hesitant push is a cylinder or a cold head.

  • Inspect die and pin

    Nicks and an off-center gap are the parison quality.

  • Heat every zone

    A cold zone in the head makes a lump. Check the controllers.

  • Measure the platen

    The mold for a tank is big. Confirm daylight and the bolt pattern.

Related Equipment

Common Applications

55-gallon drums
Automotive fuel tanks
Large water tanks
Kayaks
Industrial containers
Chemical storage

Frequently Asked Questions

What is an accumulator head blow molding machine?

An accumulator head blow molding machine collects molten plastic in a chamber (accumulator) and then rapidly expels it through a die to form a large, heavy parison. This is necessary for producing large hollow parts that require more material than a continuous extruder can deliver at the proper temperature and consistency.

How much does a used accumulator head blow molding machine cost?

Typical used-market ranges: up to about 10 lb shot about $50,000–$200,000, about 10–50 lb shot about $100,000–$400,000, and 50 lb shot and up about $200,000–$750,000+. Shot weight, platen size, programming and age move the price. Call 800-323-0307 for a current figure on a specific machine.

What is an accumulator head used for?

Large blow molded parts — drums, tanks, fuel tanks, playground and furniture parts, coolers and automotive ducts. The accumulator stores melt and pushes the whole parison out quickly so a heavy part does not sag or cool before the mold closes.

What should I inspect on a used accumulator blow molder?

The accumulator ram and seals, the parison programmer and die tooling, the extruder screw and barrel, the clamp and platen guides, and the hydraulics. Ask what part and shot weight it last ran.

Accumulator head or continuous extrusion — which do I need?

Continuous extrusion suits bottles and small containers made at high speed. An accumulator head suits parts from about 5 lb up, where the parison has to drop fast and in one push.

Need Help Finding the Right Equipment?

Contact our team with your specifications and we'll help you find the right machine.