Used Blow Molding Parts & Accessories for Sale
All used blow molding machines (15) →
See all 15 Blow Molding Machines →
0 results
No matching equipment is listed online right now.
Most of our inventory sells before we can list it. Browse related equipment or tell us what you need — we source from plant closures across North America.
Related Equipment Available Now

Item #6438
FlexBlow 4-Cavity Reheat & Stretch Blow Molding Machine
USA

Item #6415
2002 Uniloy BW 3000 DE
USA

Item #6414
2002 Uniloy BW 3000 DE
USA

Item #6409
CMP 2000/DH/2 Extrusion Blow Molder
USA

Item #6200
Sterling 20 lb. Accumulator Head
USA

Item #6027
2011 Sipa SFL 6/6
USA
Item #5887
Aoki Blow Molding Machine, New in 2012
USA

Item #5886
Aoki Blow Molding Machine, New in 2016
USA
Looking for Something Specific?
Most of our inventory sells before we can list it online. If you need a specific brand, model, or specification, tell us what you need—we have access to unlisted equipment and machines coming in from plant closures.
Browse Used Blow Molding Parts & Accessories by Brand
Looking to Sell Your Blow Molding Parts & Accessories?
Meadoworks is an active cash buyer of used industrial equipment. Get a free valuation from our AMEA-certified appraisers.
About Used Blow Molding Parts & Accessories
Meadoworks offers used blow molding parts and accessories including blow molds (used blow molds for sale), die heads, parison heads, downstream trim equipment, leak testers, and auxiliary equipment specific to blow molding operations. Purchasing used blow molds and accessories can significantly reduce the cost of setting up or expanding blow molding production.
Contact Meadoworks at 800-323-0307 for current availability of used blow molding parts and molds.
How to Choose Used Blow Molding Parts & Accessories
A mold is not a machine
This set is tooling and pieces: blow molds, die heads, parison heads, trim, and leak testers. A mold only works on a machine whose clamp, daylight, and head match it. Measure the mold before you assume it hangs on the press you already own.
Cavities, the resin, and the neck finish are the part. An HDPE bottle mold does not become a PET mold because the cavity looks similar.
Heads and wear parts
A die head and a parison programmer have to match the machine make. A head from a different builder often will not bolt up. Pins, bushings, and the die and mandrel wear and change the wall thickness.
A leak tester is downstream. It does not fix a mold that flashes.
By size: Typical Used Blow Molding Parts & Accessories Price Ranges
Bottle molds and small tooling: about $1,000–$15,000
Die heads and parison tooling: about $5,000–$50,000
Large industrial molds and accumulator heads: about $15,000–$100,000+
Whether the mold or head fits your machine, cavity count and neck finish, material (aluminum, beryllium copper or steel inserts), wear and the drawings that come with it move the price.
These are typical used-market ranges, not a quote on any machine. For a current figure on a specific machine, request a quote or call 800-323-0307.
By brand
Machine makers' heads: Bekum, Uniloy, Graham and Sterling heads and tooling are made to fit their own machines — check the bolt pattern and die size first.
Mold shops: Most bottle molds are built by independent mold shops to the machine's platen and the bottle drawing.
Meadoworks track record
Meadoworks has sold more than 85 used blow molding machines, many with their molds and die tooling. Loose blow molds and heads come up less often; tell us the machine and bottle and we will look for them.
Blow Molding Parts & Accessories Specs to Compare
| Spec | Typical range | Why it matters |
|---|---|---|
| Mold size (in) | Matched to the platen of the machine it was built for | Has to fit the press platens and daylight. Bring the press measurements. |
| Cavities and neck | The bottle you will actually make. Neck finish is not adjustable later. | |
| Resin | HDPE, PP, or PET. Cooling and the steel were cut for one of them. | |
| Head fit | Bolt pattern and programming. A loose head is a different machine's part. |
Mold size (in)
Typical range: Matched to the platen of the machine it was built for
Has to fit the press platens and daylight. Bring the press measurements.
Cavities and neck
The bottle you will actually make. Neck finish is not adjustable later.
Resin
HDPE, PP, or PET. Cooling and the steel were cut for one of them.
Head fit
Bolt pattern and programming. A loose head is a different machine's part.
What to Inspect on Used Blow Molding Parts & Accessories
Open the mold
Parting line, vents, and cooling circuits. A cracked water line is a wet bottle.
Measure shut height
Against the press. A mold that will not close in the daylight does not fit.
Check the neck
Inserts and the finish. Worn neck inserts leak under a cap.
Match the head
To the machine make. Do not buy a head on the hope it adapts.
Related Equipment
- Portable Chillers
Mold cooling on a blow line
Types of Blow Molding
Common Applications
Frequently Asked Questions
Where can I find used blow molds for sale?
Meadoworks stocks used blow molds from plant closures and production line changes. We carry molds for extrusion blow molding, injection blow molding, and stretch blow molding in various sizes and configurations. Contact us with your container specifications and we'll check our current inventory of used blow molds for sale.
How much do used blow molds cost?
Typical used-market ranges: bottle molds and small tooling about $1,000–$15,000, die heads and parison tooling about $5,000–$50,000, and large industrial molds and accumulator heads about $15,000–$100,000+. Fit, cavity count and wear move the price. Call 800-323-0307 for a current figure.
Will a used blow mold fit my machine?
Check the platen size and mounting pattern, the daylight (open and closed), the parison or preform size, the blow pin or neck finish and the cooling connections. A mold built for another make often needs adapter plates.
What are blow molding parts used for?
Replacing worn molds, die heads, blow pins, cutters and heaters, adding a bottle to an existing line, or keeping an older machine running when the maker no longer supplies parts.
What should I inspect on a used blow mold?
The pinch-off edges and neck inserts for wear, the venting and cooling channels for scale, the guide pins and bushings, and any striker plates. Ask for a sample bottle and the drawings.
Related Resources
Need Help Finding the Right Equipment?
Contact our team with your specifications and we'll help you find the right machine.