Used Extrusion Blow Molding Machines for Sale
All used blow molding machines (15) →
See all 15 Blow Molding Machines →
6 results

Item #5852
Tongda - HSII-12L/3
Canada

Item #5656
Tongda - HSII-12L/3
Canada

Item #6409
CMP 2000/DH/2 Extrusion Blow Molder
USA

Item #6415
2002 Uniloy BW 3000 DE
USA

Item #6414
2002 Uniloy BW 3000 DE
USA

Item #5454
Bekum - BM-705D
USA
Extrusion Blow Molding Machines by the numbers
From our own catalog: machines listed now and machines we have sold. Updated every few minutes.
Our track record
11 machines sold · 5 makes · model years 1992–2015
Looking for Something Specific?
Most of our inventory sells before we can list it online. If you need a specific brand, model, or specification, tell us what you need—we have access to unlisted equipment and machines coming in from plant closures.
Browse Used Extrusion Blow Molding Machines by Brand
Browse Used Extrusion Blow Molding Machines by Country
Looking to Sell Your Extrusion Blow Molding Machines?
Meadoworks is an active cash buyer of used industrial equipment. Get a free valuation from our AMEA-certified appraisers.
About Used Extrusion Blow Molding Machines
Extrusion blow molding machines (also known as extrusion blow moulding machines) are the most common type of blow molding equipment. These machines extrude a hollow tube of molten plastic (parison), capture it in a mold, and inflate it with air to form the final shape. EBM machines produce HDPE bottles, industrial drums, automotive fuel tanks, toys, and countless other hollow plastic parts.
Used extrusion blow molding machines are available in continuous extrusion, accumulator head, and shuttle configurations. Continuous extrusion machines offer the highest production rates for small to medium containers. Accumulator head machines handle larger parts and heavier parisons. Look for features including parison programming (wall thickness control), view stripe capability, and multi-layer co-extrusion heads.
Meadoworks stocks used extrusion blow molding machines from Graham Engineering, Uniloy, Bekum, Kautex, Wilmington, Sterling, Magic, and Battenfeld Fischer. Contact us at 800-323-0307 for blow molding machine pricing and availability.
How to Choose a Used Extrusion Blow Molding Machine
Continuous, shuttle, or accumulator
Extrusion blow molding extrudes a parison, closes a mold on it, and blows. Continuous extrusion feeds small and medium bottles at a high rate, often with a shuttle or a wheel. An accumulator head stores a shot and drops a heavy parison for drums, tanks, and large parts. They are different machines. A bottle line will not become a drum machine because you slow it down.
Head tooling, the number of cavities, and parison programming are the process. Wall thickness control is what makes a bottle hold and a drum weigh what you quoted.
The mold and the trim
Clamp tonnage and platen size have to take your mold. Deflashing and takeout are how the bottle leaves. A machine without a working trim leaves a hand operation you should price. Resin is usually HDPE or PP for these machines. PET bottles are a stretch-blow process, not this one.
Ask the shot or the head size, the cavitation, and what bottle it last ran.
By size: Typical Used Extrusion Blow Molding Machine Price Ranges
Small single-station shuttle machines (bottles to about 1 gallon): about $25,000–$90,000
Dual-station and multi-head shuttle machines: about $60,000–$250,000
Large accumulator-head and multi-layer machines: about $150,000–$500,000+
Head count and layers (single layer or co-extruded), parison programming points, clamp force and platen size, the molds and trimmer included, control and age move the price. Bekum and Uniloy shuttle machines hold value well.
These are typical used-market ranges, not a quote on any machine. For a current figure on a specific machine, request a quote or call 800-323-0307.
Extrusion Blow Molding Machine Specs to Compare
| Spec | Typical range | Why it matters |
|---|---|---|
| Head type | Continuous for bottles. Accumulator for a heavy parison. Do not guess from the clamp alone. | |
| Cavities | Rate is cavities times the cycle. A single-head machine will not hit a wheel's output. | |
| Clamp (tons) | About 5–40 tons on most shuttle machines | Has to hold the mold and the blow pressure. Large parts need the platen as much as the tons. |
| Parison programming | Points of wall-thickness control. Without it, a shaped bottle is a heavy bottle. |
Head type
Continuous for bottles. Accumulator for a heavy parison. Do not guess from the clamp alone.
Cavities
Rate is cavities times the cycle. A single-head machine will not hit a wheel's output.
Clamp (tons)
Typical range: About 5–40 tons on most shuttle machines
Has to hold the mold and the blow pressure. Large parts need the platen as much as the tons.
Parison programming
Points of wall-thickness control. Without it, a shaped bottle is a heavy bottle.
What to Inspect on a Used Extrusion Blow Molding Machine
Name the head
Continuous, shuttle, or accumulator. The rest of the inspection follows that.
Look at the die and pin
Wear here is the parison. Nicks and an off-center pin are a bad wall.
Cycle the clamp
Guides, the toggle or the cylinders, and whether both platens meet square.
Check trim and takeout
Knives, the deflash, and the conveyor. A missing trim is labor.
Related Equipment
- Desiccant Dryers
Dry the resin before it reaches the screw
- Portable Chillers
Cool the mold and the hydraulics
Types of Blow Molding
Common Applications
Frequently Asked Questions
What is extrusion blow molding?
Extrusion blow molding (EBM) extrudes a hollow tube of molten plastic (called a parison) that drops into a two-piece mold. The mold closes around the parison and compressed air inflates it to match the mold shape. After cooling, the mold opens and the part is ejected. EBM is the most common blow molding process for producing hollow plastic containers.
How much does a used extrusion blow molding machine cost?
Used extrusion blow molding machine prices range from $25,000 for small single-head machines to $500,000+ for large multi-head accumulator systems. Pricing depends on head count, shot size, clamp tonnage, parison programming capability, brand, and condition. Graham, Uniloy, and Bekum machines hold value well in the used market. Request a quote on any listing or call 800-323-0307 for a current price.
What is the difference between single-layer and multi-layer extrusion blow molding?
A single-layer machine extrudes one resin, which covers most milk, detergent and household bottles. Multi-layer (2- to 6-layer co-extrusion) heads add barrier layers such as EVOH, or a regrind or view-stripe layer, for food, fuel and chemical containers. Multi-layer heads need one extruder per layer and cost more used.
What brands make extrusion blow molding machines?
Bekum is the extrusion blow make Meadoworks has handled most, followed by Uniloy; we have also handled Rocheleau, Techne, CMP and Tongda machines. Graham, Kautex and Jomar are common on the used market too.
What should I inspect on a used extrusion blow molder?
Run a parison and look for even wall and a clean die, check the parison programmer, the screw and barrel, the shuttle or clamp guides, the blow pins and the cooling. Ask which molds, neck finishes and trimmer come with it.
Related Resources
Recently Sold Extrusion Blow Molding Machines
View all sold blow molding machines →Need Help Finding the Right Equipment?
Contact our team with your specifications and we'll help you find the right machine.

