Used Stretch Blow Molding Machines for Sale
All used blow molding machines (15) →
See all 15 Blow Molding Machines →
Recently sold
SOLDItem #5187
2020 Midas Altatech MA-100-FSIII - Injection Stretch Blow Molder
USA
Item #3308
2000 Nissei ASB PF8-4B Injection Stretch Blow Molder
USA
Item #3104
2007 Nissei ASB PF8-4B Injection Stretch Blow Molder
USA
Item #3009
2003 Sipa ECS FX20/80 EVO PET Thermal Stretch Blow Molder
USA
SOLDItem #3965
2007 Sipa SFL-4 Linear Blowmolder
USA
SOLDItem #4050
2009 Nissei ASB PF6-2B Injection Stretch Blow Molder
USA
SOLDItem #5389
2019 PET Technologies APF-10
USA
Item #3307
1999 Nissei ASB PF8-4B Injection Stretch Blow Molder
USA
Item #3010
2003 Sipa ECS FX20/80 EVO PET Thermal Stretch Blow Molder
USA
SOLDItem #4069
2004 Sidel SBO 2/4 S2
USA
Item #3804
1996 Nissei ASB ASB 650 NHII Injection Stretch Blow Molder
USA
Item #3805
1995 Nissei ASB ASB 650 NHII Injection Stretch Blow Molder
USA
Item #3803
2009 Nissei ASB PF6-2B Injection Stretch Blow Molder
USA
Item #3802
2008 Nissei ASB PF6-2B Injection Stretch Blow Molder
USA
Item #3823
2000 Uniloy 750NN Injection Stretch Blow Molder
USA
Item #3806
2005 Nissei ASB ASB 650 EXHIII Injection Stretch Blow Molder
USA
Item #3822
2000 Uniloy 750 Injection Stretch Blow Molder
USA
SOLDItem #2313
2003 Sipa ECS FX20/80 EVO PET Thermal Stretch Blow Molder
USA
SOLDItem #3011
1997 Sidel SBO 24/26 Reheat Stretch Blow Molder
USA
Item #2312
2003 Sipa ECS FX20/80 EVO PET Thermal Stretch Blow Molder
USA
Item #2591
1991 Sidel SBO 24/24 Reheat Stretch Blow Molder
USA
Item #2717
1999 Sipa ECS FX20/64 EVO PET Thermal Stretch Blow Molder
USA
Item #2592
Sidel SBO 24/20 Reheat Stretch Blow Molder
USA
Item #2593
Sidel SBO 24/20 Reheat Stretch Blow Molder
USA
Stretch Blow Molding Machines by the numbers
From our own catalog: machines listed now and machines we have sold. Updated every few minutes.
Our track record
42 machines sold · 8 makes · model years 1991–2020
By brand
| Brand | In stock now | Sold by Meadoworks | Model years |
|---|---|---|---|
| Sipa | 1 | 6 | 1999–2011 |
| FlexBlow | 1 | 0 | — |
| Sidel | 0 | 21 | 1991–2004 |
| Nissei ASB | 0 | 9 | 1995–2009 |
Looking for Something Specific?
Most of our inventory sells before we can list it online. If you need a specific brand, model, or specification, tell us what you need—we have access to unlisted equipment and machines coming in from plant closures.
Browse Used Stretch Blow Molding Machines by Brand
Browse Used Stretch Blow Molding Machines by Country
Looking to Sell Your Stretch Blow Molding Machines?
Meadoworks is an active cash buyer of used industrial equipment. Get a free valuation from our AMEA-certified appraisers.
About Used Stretch Blow Molding Machines
Stretch blow molding machines (also known as stretch blow moulding machines) produce biaxially oriented PET bottles by stretching preforms both axially and radially during the blowing process. This biaxial orientation improves clarity, strength, and barrier properties — making stretch blow molding the standard process for PET water bottles, carbonated beverage bottles, and food containers.
Stretch blow moulders are available in single-stage (integrated injection and blow molding) and two-stage (separate preform injection and reheat-stretch-blow) configurations. Two-stage systems handle higher volumes and allow preforms to be purchased separately, while single-stage injection stretch blow molding machines offer more flexibility for smaller runs.
Meadoworks stocks used stretch blow molding machines from Sidel, Krones, SIPA, Nissei ASB, Aoki, SMI, and KHS. Contact us at 800-323-0307.
How to Choose a Used Stretch Blow Molding Machine
Reheat, then stretch
Stretch blow molding heats a PET preform and stretches it in the blow mold, lengthwise and across, so the bottle is clear and strong. Two-stage machines buy or mold preforms separately and reheat them. Single-stage machines inject the preform and blow it in one frame. High-volume water and soda lines are usually two-stage. A smaller specialty bottle is often single-stage.
Cavities and bottles per hour are the rate. They only count for the preform and the bottle you will actually run.
Ovens, stretch rods, and air
The oven profile has to heat the preform body and spare the neck. Lamps, reflectors, and the chain or the spindles are the wear. Stretch rods have to hit the bottom without scuffing the preform. Blow air, often a high-pressure compressor in the tens of bar, is a separate machine. A blow molder without that air does not make bottles.
The mold and the preform neck finish have to match. A 28-millimeter neck tool will not run a different finish.
By size and output: Typical Used Stretch Blow Molding Machine Price Ranges
Small linear and semi-automatic machines (up to about 2,000 bottles/hour): about $30,000–$120,000
Linear production machines (about 2,000–10,000 bottles/hour): about $100,000–$300,000
High-speed rotary systems (10,000+ bottles/hour): about $250,000–$1,000,000+
Output and cavity count, one-step or two-step, the bottle molds included, preform oven condition, age and brand move the price. Sidel rotary systems for high-volume PET bottling sell at the top of the range.
These are typical used-market ranges, not a quote on any machine. For a current figure on a specific machine, request a quote or call 800-323-0307.
Stretch Blow Molding Machine Specs to Compare
| Spec | Typical range | Why it matters |
|---|---|---|
| Cavities | Rate follows cavities and the index time. A linear machine and a rotary wheel are different outputs. | |
| Bottle volume | The mold and the preform stretch have a range. A water-bottle machine is not a gallon-jug machine. | |
| Stage | Reheat two-stage versus single-stage injection-stretch. The preform supply is different. | |
| Blow air (bar) | Often about 25–40 bar | You need a high-pressure compressor sized to the cavities. The blower frame does not include it. |
Cavities
Rate follows cavities and the index time. A linear machine and a rotary wheel are different outputs.
Bottle volume
The mold and the preform stretch have a range. A water-bottle machine is not a gallon-jug machine.
Stage
Reheat two-stage versus single-stage injection-stretch. The preform supply is different.
Blow air (bar)
Typical range: Often about 25–40 bar
You need a high-pressure compressor sized to the cavities. The blower frame does not include it.
What to Inspect on a Used Stretch Blow Molding Machine
Heat a preform
Lamps out, a dirty reflector, or a spindle that slips makes a hazy or a blown-out bottle.
Watch the stretch rod
Bent rods and a late stretch are the base of the bottle.
Match neck finish
Preform and mold have to be the same finish. Close is a leaker.
Find the compressor
High-pressure air is part of the cell. Confirm you have it or you are buying it too.
Related Equipment
- High-Pressure Compressors
Blow air for PET bottles
- Desiccant Dryers
Dry the resin before it reaches the screw
Types of Blow Molding
Common Applications
Frequently Asked Questions
What is stretch blow molding?
Stretch blow molding (SBM) produces biaxially oriented bottles by stretching a heated preform both lengthwise (with a stretch rod) and outward (with air pressure). This dual orientation improves clarity, strength, and gas barrier properties. It's the standard process for PET bottles used in water, carbonated beverages, and food packaging.
How much does a used stretch blow molding machine cost?
Used stretch blow moulding machine prices range from $50,000 for small single-stage machines to $500,000+ for high-speed two-stage rotary systems. Sidel and Krones machines for high-volume PET bottling command the highest prices. Contact Meadoworks at 800-323-0307 for stretch blow moulder pricing.
One-step or two-step stretch blow molding — which do I need?
One-step machines (Nissei ASB, Aoki) mold the preform and blow the bottle in one machine; they suit smaller runs and jars or bottles with special necks. Two-step machines (Sidel, Sipa, Krones) reheat preforms made elsewhere and are the standard for high-volume water, soda and juice bottles.
What brands make stretch blow molding machines?
Sidel is the stretch blow make Meadoworks has handled most, followed by Nissei ASB and Sipa; we have also handled Uniloy, Midas Altatech and FlexBlow machines. Krones and Aoki are common on the used market too.
What should I inspect on a used stretch blow molder?
The preform oven lamps and reflectors, the stretch rods and blow valves, the high-pressure air system (often 40 bar), the molds and their neck finish, and the transfer and spindle chains on rotary machines. Ask for the bottle sizes and output it last ran.
Related Resources
Need Help Finding the Right Equipment?
Contact our team with your specifications and we'll help you find the right machine.