Skip to main content

Used Sheet Extrusion Lines for Sale

All used plastic extruders & extrusion equipment (14) →


See all 14 Extruders & Extrusion Lines →

Recently sold

Get alerts about new extrusion listings by email

Looking for Something Specific?

Most of our inventory sells before we can list it online. If you need a specific brand, model, or specification, tell us what you need—we have access to unlisted equipment and machines coming in from plant closures.

Browse Used Sheet Extrusion Lines by Brand

Looking to Sell Your Sheet Extrusion Lines?

Meadoworks is an active cash buyer of used industrial equipment. Get a free valuation from our AMEA-certified appraisers.

Sell Your Equipment

About Used Sheet Extrusion Lines

Sheet extrusion lines produce continuous plastic sheet from 0.010" to 0.500"+ thickness in materials including PET, PP, PS, ABS, HDPE, PVC, and PMMA. A complete plastic sheet extrusion machine includes an extruder, flat die, polishing rolls (3-roll stack or calendar), cooling section, edge trim, and winder or stacker. Sheet extruder machines serve the thermoforming, packaging, construction, automotive, and signage industries.

PET sheet extrusion lines are in particularly high demand for food packaging thermoforming. PET sheet extruder machines require crystallizing dryers, specialized screw designs, and precise temperature control for optical clarity. Used PET sheet extrusion machines offer significant savings over new systems.

Meadoworks stocks used sheet extrusion lines from Davis-Standard, Welex, PTi, Battenfeld-Cincinnati, and Reifenhauser. Contact us at 800-323-0307 for plastic sheet extrusion machine availability.

How to Choose a Used Sheet Extrusion Line

Die width and the roll stack

A sheet line is an extruder, a flat die, and a roll stack that sets thickness and finish. Die width is the sheet you can make. The stack, three rolls on most lines, has to span that width and hold a gap. A line whose stack is narrower than the die, or whose rolls are scored, will not make saleable sheet.

Thickness control is the gap and the pull. Later lines have a gauge scanner. Older lines are a skilled operator and a micrometer. Know which you are buying.

What has to come with it

The extruder size has to feed the die at the width and the mils you run. A small extruder on a wide die makes a thin, uneven sheet. Edge trim, a winder or a shear, and the temperature on the rolls are part of the line. A stack without a working temperature unit will not polish.

Resin matters. PET, PP, and ABS do not want the same screw or the same roll temperatures. Ask what the line last ran.

By size: Typical Used Sheet Extrusion Line Price Ranges

Narrow or basic lines (up to about 36 in wide): about $50,000–$150,000

Production lines (about 36–60 in wide): about $120,000–$350,000

Wide, multi-layer and PET sheet lines: about $200,000–$750,000+

Die width, extruder size and count (co-extrusion), the roll stack, gauge control, winder or cutter, the resin it is set up for (PET, PP, PS, HIPS) and age move the price.

These are typical used-market ranges, not a quote on any machine. For a current figure on a specific machine, request a quote or call 800-323-0307.

By brand

Welex: US sheet extruders and lines common on the used market.

Killion: Smaller sheet lines and extruders; we have handled Killion.

ICMA San Giorgio: Italian sheet lines; we have handled ICMA.

Jwell, Jing Ye Da (JYD), Chi Chang and Sunwell: Asian-built sheet lines we have handled, mostly from the 2010s.

Meadoworks track record

Meadoworks has sold more than 60 used extrusion machines and lines. Sheet lines we have handled include ICMA San Giorgio, Killion, Jwell, Jing Ye Da (JYD), Chi Chang, PE Tech and Sunwell, from about 2005 to 2021.

Sheet Extrusion Line Specs to Compare

Die width (in)

Typical range: About 24–80 in on most used lines

The widest sheet, before trim. Your product has to fit inside it with an edge you can cut.

Roll diameter (in)

Larger rolls hold a flatter sheet and a better finish. Scored rolls print that score into every foot.

Thickness range

The gap and the haul-off have a real range. A line built for thin packaging will not make a heavy thermoforming sheet.

Extruder size

Typical range: About 2.5–6 in screw

Has to supply the die. Rate and width have to agree.

What to Inspect on a Used Sheet Extrusion Line

  • Look at the rolls

    Scoring, plating wear, and a gap that will not repeat are the stack. Turn them.

  • Heat the rolls

    Each roll should hold a setpoint. A dead zone is a curl or a dull sheet.

  • Inspect the die

    Lips, restrictor bar, and heaters. A ding in the lip is a line in the sheet forever.

  • Trace the whole line

    Extruder, screen changer, die, stack, trim, winder. Name what is actually in the sale.

Related Equipment

Common Applications

Thermoforming sheet
Food packaging
Construction panels
Automotive interior trim
Signage
Stationery

Frequently Asked Questions

How much does a used sheet extrusion line cost?

Used plastic sheet extrusion line prices range from $50,000-$150,000 for basic systems to $200,000-$750,000+ for high-output PET sheet extrusion lines. Pricing depends on extruder size, line width, material capability, downstream equipment, and condition. Contact Meadoworks at 800-323-0307.

What comes with a used sheet extrusion line?

Usually the extruder, screen changer, melt pump (on many lines), sheet die, roll stack, cooling conveyor, pull rolls and a winder or shear. Ask which pieces are included and whether the die and roll stack match the width and gauge you need.

What is a roll stack on a sheet line?

Three or more polished, temperature-controlled rolls that take the sheet from the die, set its thickness and surface finish and cool it. Roll diameter, width and surface condition matter as much as the extruder.

What resins can a used sheet line run?

It depends on the screw, die and roll stack. PS and HIPS, PP, ABS, PET, HDPE and acrylic each want a different screw design and roll temperature, and PET needs a dryer or a vented twin-screw. Ask what the line was set up for and whether the screw has been changed.

What should I inspect on a used sheet extrusion line?

The die lips and heaters, the roll surfaces (scratches print onto the sheet), the roll temperature controllers, the extruder screw and gearbox, and the winder or cutter. Ask what resin and gauge it last ran.

Need Help Finding the Right Equipment?

Contact our team with your specifications and we'll help you find the right machine.