Skip to main content

Used Large Tonnage Plastic Injection Molding Machines for Sale

All used injection molding machines (63) →


See all 63 Injection Molding Machines →

6 results

Large Tonnage Injection Molding Machines by the numbers

From our own catalog: machines listed now and machines we have sold. Updated every few minutes.

Our track record

191 machines sold · 21 makes · model years 1984–2021

By brand

BrandIn stock nowSold by MeadoworksModel years
Milacron2481990–2007
Engel1101988–2015
Nissei121998–2021
Borche102023
Uniloy10—
Van Dorn0281987–2006
Husky0211995–2009
UBE0141995–2010
Haitian0112006–2016
HPM0101991–2003

Spec ranges across our machines

SpecRangeMachines
Clamp force1,000–3,709 tons197
Shot size30–1,468 oz190
Screw diameter80–160 mm64
Tie-bar spacing (first figure)39.4–90.6 in193
Platen size (first figure)61.2–127 in186

Controls we see most: CAMAC (25), Pathfinder (19), Polaris (13), KEBA (9), Ai (6), Xtreem (5)

Get alerts about new injection molding listings by email

Looking for Something Specific?

Most of our inventory sells before we can list it online. If you need a specific brand, model, or specification, tell us what you need—we have access to unlisted equipment and machines coming in from plant closures.

Looking to Sell Your Large Tonnage Injection Molding 1000+T?

Meadoworks is an active cash buyer of used industrial equipment. Get a free valuation from our AMEA-certified appraisers.

Sell Your Equipment

About Used Large Tonnage Injection Molding 1000+T

Large tonnage injection molding machines (1,000+ tons) — also known as large injection moulding machines or industrial injection molding machines — are required for large parts with significant projected area. These industrial plastic molding machines handle automotive bumpers, dashboards, pallets, large containers, appliance panels, and heavy industrial components.

Large plastic injection molding machines are available in toggle, direct hydraulic, and two-platen configurations. Two-platen designs are increasingly popular for large tonnage applications because they offer smaller footprints relative to tonnage. Key specifications include platen dimensions, tie bar spacing, daylight opening, shot capacity, and clamp force uniformity across the platen.

Meadoworks has sold more than 150 used injection molding machines of 1,000 tons and up, to 3,500 tons, most often Milacron, Van Dorn, Husky, UBE, Haitian and Engel. Machines between 500 and 1,000 tons are on the 500–1,000 ton page. At this size, plan the rigging, foundation and freight before the machine ships. Contact us at 800-323-0307 for high press tonnage large part plastic injection molding machines.

How to Choose a Used Large-Tonnage Injection Molding Machine

Start at the mold, not the tons

Large usually means roughly 1,000 tons and up, the presses that run bumpers, bins, pallets, and big housings. Two-platen clamps dominate because a toggle of that size is very long. The mold's projected area and the tie-bar opening decide the press. A 1,500-ton clamp with tie bars the tool cannot pass is useless.

Shot size has to fill a heavy part. A large clamp with a small injection unit is a common used mismatch. Read both nameplates.

The building has to take it

Floor loading, crane height, door size, and the power drop are part of the buy. A press that will not come out of the seller's door in one piece, or will not stand up in yours, is a rigging project you should price before the iron. Oil volume and cooling water scale with the tons.

Robots and conveyors for a large part need reach and a beam that clears the mold. Plan that with the press, not after it lands.

By clamp force: Typical Used Large-Tonnage Injection Molding Machine Price Ranges

1,000–1,500 tons: about $150,000–$400,000

1,500–3,000 tons: about $250,000–$750,000

3,000 tons and up: about $500,000–$1,500,000+

Age and control, two-platen versus toggle or hydraulic clamp, shot size, tie-bar spacing and platen size, injection unit (single or co-injection) and hours move the price most. Budget separately for rigging, foundations and freight — moving a press this size often runs $15,000–$50,000+.

These are typical used-market ranges, not a quote on any machine. For a current figure on a specific machine, request a quote or call 800-323-0307.

Large-Tonnage Injection Molding Machine Specs to Compare

Clamp (tons)

Typical range: About 1,000 tons and up

Match projected area and cavity pressure. Do not buy the next size up because it is the one in the auction.

Shot size (oz)

Large parts need a screw that finishes recovery before the cooling ends.

Tie-bar spacing (in)

Big tools fail here. Measure the mold, then the bars.

Power and cooling

The service and the tower water have to exist. The press will not bring them.

What to Inspect on a Used Large-Tonnage Injection Molding Machine

  • Measure mold against tie bars

    This is the whole fit. Tonnage is the second number.

  • Read the injection unit

    Shot, screw diameter, and whether the barrel is the original size.

  • Price the move

    Door, crane, and floor. A press you cannot rig is not a deal.

  • Check clamp locks and oil

    On a two-platen, the tie-bar locks and the clamp cylinders are the wear.

Related Equipment

Common Applications

Automotive bumpers & panels
Pallets
Large containers
Appliance housings
Industrial totes
Playground equipment
Automotive dashboards

Frequently Asked Questions

How much does a used large injection molding machine cost?

Used large injection molding machines (1,000+ tons) typically range from $150,000-$750,000+ depending on tonnage, brand, age, and condition. Very large machines (3,000-6,000 tons) can exceed $1,000,000. Two-platen machines from Engel and Krauss Maffei command premium pricing. Rigging and shipping costs for large tonnage machines are also significant — $15,000-$50,000+ depending on distance and complexity. Request a quote on any listing or call 800-323-0307 for a current price.

What is the largest injection molding machine available?

The largest industrial injection molding machines available exceed 6,000 tons of clamping force. These machines are used for very large automotive parts, industrial pallets, and massive containers. Engel, Krauss Maffei, and Husky manufacture machines in these extreme tonnages. In the used market, machines over 4,000 tons are relatively rare.

How do I move a large injection molding machine?

Presses over 1,000 tons are usually split — clamp, injection unit, hydraulics and controls — and moved on several trucks with a crane or gantry at each end. The rigger needs the machine weights, the floor and door clearances and a foundation drawing for the new site. Meadoworks can put you in touch with riggers who move these presses regularly.

What brands make 1,000+ ton injection molding machines?

Meadoworks has sold about 190 presses of 1,000 tons and up. Cincinnati Milacron, Van Dorn, Husky, UBE, Haitian, Engel and HPM are the makes we have sold most; Krauss Maffei, Engel (DUO two-platen) and Husky also lead the used market at this size.

What are large injection molding machines used for?

Automotive bumpers, fascias and door panels, pallets, totes and crates, refuse carts, large appliance housings, furniture and structural parts. Many of these molders also run structural-foam or gas-assist on the same press size.

Need Help Finding the Right Equipment?

Contact our team with your specifications and we'll help you find the right machine.