Skip to main content

Used PET Preform Injection Molding Machines for Sale

All used injection molding machines (63) →


See all 63 Injection Molding Machines →

0 results

PET Preform Injection Molding Machines by the numbers

From our own catalog: machines listed now and machines we have sold. Updated every few minutes.

Our track record

24 machines sold · 4 makes · model years 1991–2019

By clamp force

Clamp forceIn stock nowSold by Meadoworks
100–299 tons01
300–499 tons015
500–999 tons08

Spec ranges across our machines

SpecRangeMachines
Clamp force276–600 tons24
Tie-bar spacing (first figure)28.3–40 in19
Platen size (first figure)34.6–51.5 in19

Controls we see most: Siemens (4)

Get alerts about new injection molding listings by email

Looking for Something Specific?

Most of our inventory sells before we can list it online. If you need a specific brand, model, or specification, tell us what you need—we have access to unlisted equipment and machines coming in from plant closures.

Browse Used PET Preform Injection Molding Machines by Brand

Looking to Sell Your PET Preform Injection Molding Machines?

Meadoworks is an active cash buyer of used industrial equipment. Get a free valuation from our AMEA-certified appraisers.

Sell Your Equipment

About Used PET Preform Injection Molding Machines

PET preform injection molding machines are high-output systems designed specifically for producing PET (polyethylene terephthalate) preforms — the test-tube-shaped intermediate product that is subsequently reheated and stretch blow molded into bottles. These machines require specialized screws optimized for PET processing, high injection speeds, precision cooling systems, and multi-cavity molds (typically 48 to 144+ cavities).

The PET preform market demands machines capable of very fast cycle times (typically 8-12 seconds), extreme consistency for wall thickness distribution, and high uptime for 24/7 production. Husky dominates this market segment with their HyPET and HyCAP platforms.

Meadoworks has sold more than 20 used PET preform systems, most of them Husky; Netstal, SIPA and Nissei ASB systems also come up. Contact us at 800-323-0307 for current availability.

How to Choose a Used PET Preform Injection Molding Machine

A press built for preforms

A PET preform machine injects a test-tube-shaped preform that a stretch-blow molder later turns into a bottle. The neck finish is molded here and never changes in the blow step. Cavitation, cycle time, and the hot runner are the machine. A general-purpose press can mold a preform. A dedicated preform system holds the neck, cools it, and drops a preform a blow molder will accept.

Shot and cavitation have to agree. A 72-cavity tool needs a plasticizing rate the screw can recover before the cooling of the neck is done.

Hot runner and takeout

Preform molds are hot-runner molds. Valve gates, the manifold, and the controller are part of the tool as much as the press. A robot or a cooling takeout has to catch the preforms without scarring the neck. A press sold without the mold still has to match the shut height and the takeout the mold expects.

Resin is PET. Drying is not optional. A wet preform is a hazy bottle.

By brand

Husky: HyPET systems — by far the make we have sold most for PET preforms.

Netstal: PET-Line preform systems; we have sold Netstal.

Engel: Preform versions of its presses; we have sold Engel preform machines.

Sacmi and KraussMaffei: Preform systems seen less often on the used market.

PET Preform Injection Molding Machine Specs to Compare

Cavities

Typical range: Often 24–144

Rate is cavities times cycle. The screw has to recover that shot.

Cycle (sec)

Typical range: Often about 8–15 sec

Neck cooling sets the floor. A quoted cycle on a lighter preform is not your cycle.

Clamp (tons)

Has to hold the hot-runner tool. Cavitation drives the tons more than the preform weight.

Neck finish

The finish is cut in this mold. The blow molder cannot change it.

What to Inspect on a Used PET Preform Injection Molding Machine

  • Ask if the mold is included

    A preform press without the cavity and the hot runner is a clamp. Price them separately in your head.

  • Heat the manifold

    Open zones and a dead thermocouple scrap a cavity. Cycle the controller.

  • Watch takeout

    Necks get scratched here. The cooling tube or the robot has to match the cavity count.

  • Confirm PET drying

    The dryer is a separate machine. The press will not dry the resin.

Related Equipment

Common Applications

Water bottle preforms
Beverage bottle preforms
Food container preforms
Consumer packaging
Pharmaceutical bottles

Frequently Asked Questions

What is a PET preform injection molding machine?

A PET preform injection molding machine is a high-speed, multi-cavity system designed to produce PET preforms — the intermediate product that gets stretch blow molded into bottles. These machines feature PET-specific screws, rapid cooling systems, and molds with 48-144+ cavities for high-volume production.

How much does a used PET preform machine cost?

Used PET preform injection molding systems (machine + mold) typically range from $200,000-$1,000,000+ depending on cavity count, output capacity, brand, and condition. Husky HyPET systems are the most common and command premium resale values due to market dominance. Contact Meadoworks at 800-323-0307.

What should I check on a used PET preform system?

The mold and hot runner first — cavity count, neck finish and wear decide what the system can make. Then the injection unit and screw, the post-mold cooling and robot, the dryer and the chiller. Ask for the cycle time and preform weight it last ran.

Is the mold included with a used PET preform machine?

Often, but not always. A system sold with its preform mold and hot runner is worth much more than the press alone, and a mold for your neck finish can cost as much as the machine. Check the cavity count and finish before you compare prices.

What tonnage are PET preform injection molding machines?

Most preform systems are 150 to 600 tons. The PET preform machines we have sold, mostly Husky, ran from about 276 to 600 tons.

Need Help Finding the Right Equipment?

Contact our team with your specifications and we'll help you find the right machine.