Skip to main content

Used Hybrid Injection Molding Machines for Sale

All used injection molding machines (63) →


See all 63 Injection Molding Machines →

0 results

Get alerts about new injection molding listings by email

Looking for Something Specific?

Most of our inventory sells before we can list it online. If you need a specific brand, model, or specification, tell us what you need—we have access to unlisted equipment and machines coming in from plant closures.

Browse Used Hybrid Injection Molding Machines by Brand

Looking to Sell Your Hybrid Injection Molding Machines?

Meadoworks is an active cash buyer of used industrial equipment. Get a free valuation from our AMEA-certified appraisers.

Sell Your Equipment

About Used Hybrid Injection Molding Machines

Hybrid injection molding machines combine electric servo-driven injection units with hydraulic clamp systems, offering a balance of precision, energy efficiency, and cost-effectiveness. These machines provide the precision and speed advantages of all-electric injection for the plasticizing and injection phases, while using hydraulic power for the clamp — which is more cost-effective at higher tonnages.

Hybrid machines typically offer 20-30% energy savings over fully hydraulic machines and approach the precision of all-electric machines for injection control. They're an excellent choice for molders who need better precision than hydraulic machines provide but don't require full cleanroom capability.

Hybrid machines on the used market include models from Engel, Krauss Maffei, Milacron, Sumitomo and Arburg. They come up less often than hydraulic or all-electric machines. Contact us at 800-323-0307 to ask about upcoming machines.

How to Choose a Used Hybrid Injection Molding Machine

What is actually electric

Hybrid usually means a servo-driven hydraulic pump, sometimes with an electric screw rotate or an electric eject, and a hydraulic clamp. You get a quieter, cooler, cheaper-to-run hydraulic press. You do not get the all-electric ballscrew story. Ask which axes are servo and which are still oil.

If the quote says hybrid and the power unit is a fixed vane pump, it is a hydraulic press with a new label.

Why shops buy them

They sit between an old hydraulic and a full electric on price and on energy. A plant that already maintains oil, and wants lower kilowatts without retraining everyone onto servos, is the fit. A medical cell that cannot have oil in the room is not.

Shot, tie bars, and screw wear are unchanged. The servo drive and its cooling are the new inspection.

By clamp force: Typical Used Hybrid Injection Molding Machine Price Ranges

Under 200 tons: about $25,000–$90,000

200–500 tons: about $50,000–$200,000

500 tons and up: about $120,000–$400,000+

Which motions are electric (injection, screw recovery, clamp), the age of the servo drives and control, shot size, hours and brand move the price most. A hybrid usually sells between a hydraulic and an all-electric press of the same size and age.

These are typical used-market ranges, not a quote on any machine. For a current figure on a specific machine, request a quote or call 800-323-0307.

By brand

Arburg: Allrounder Hidrive hybrids — electric toggle clamp and dosing with a hydraulic accumulator for injection.

Sumitomo Demag: El-Exis SP hybrids built for fast thin-wall packaging.

Milacron: Ferromatik presses; the hybrid we sold most recently was a 2016 Milacron Ferromatik 220-ton.

Haitian: Servo-hydraulic and electric-injection presses that are common on the used market from 2010 on.

Meadoworks track record

Meadoworks has sold more than 2,100 used injection molding machines. Hybrids are a small share of them — most presses we list are hydraulic or all-electric — so a hybrid in stock tends to be a specific make and size; call 800-323-0307 and we will tell you what is coming in.

Hybrid Injection Molding Machine Specs to Compare

Clamp (tons)

Typical range: Mostly 100–600 tons on the used market

Still a hydraulic clamp on most hybrids. Size it from the mold, not from the servo badge.

Servo pump (kW)

This is the energy difference. A nameplate that does not mention a servo drive is not a hybrid.

Shot size (oz)

Same cushion and recovery rules as a hydraulic press.

Which axes are electric

Screw rotate, eject, or only the pump. The answer changes the spare parts.

What to Inspect on a Used Hybrid Injection Molding Machine

  • Find the servo drive

    Open the cabinet or read the pump motor. No drive means no hybrid.

  • Check oil and heat

    The clamp is still hydraulic. Milky or hot oil is the same failure as on an older press.

  • Read drive alarms

    A servo pump that faults under hold pressure will not save the energy you bought it for.

  • Match the mold

    Tie bars, shot, and daylight do not get a waiver because the pump is efficient.

Related Equipment

Common Applications

Automotive precision parts
Consumer goods
Packaging
Multi-material molding
Technical components

Frequently Asked Questions

What is a hybrid injection molding machine?

A hybrid injection molding machine combines an electric servo-driven injection unit with a hydraulic clamping system. This provides the precision and energy efficiency of electric injection with the power and cost advantages of hydraulic clamping. Hybrids offer 20-30% energy savings over fully hydraulic machines.

Should I buy a hybrid or all-electric injection molding machine?

Choose all-electric if you need cleanroom capability, maximum precision, or lowest energy consumption. Choose hybrid if you need good precision at a lower purchase price, especially in larger tonnages where all-electric options become very expensive. Hybrid machines are the best value compromise for most general-purpose applications.

How much does a used hybrid injection molding machine cost?

Typical used-market ranges: under 200 tons about $25,000–$90,000, 200–500 tons about $50,000–$200,000, and 500 tons and up about $120,000–$400,000+. Age, which motions are electric, control and hours move the price. Call 800-323-0307 for a current figure on a specific machine.

Is a hybrid injection molding machine more energy efficient?

Yes, compared with a fixed-pump hydraulic press. Electric screw recovery and servo-driven pumps only draw power when a motion needs it, which typically cuts energy use by a third or more. An all-electric press is usually more efficient still.

What should I inspect on a used hybrid press?

Both systems: the servo drives, motors and ballscrews or belts on the electric side, and the pump, accumulator, valves and oil on the hydraulic side. Ask for the drive fault history and confirm the control version is still supported.

Need Help Finding the Right Equipment?

Contact our team with your specifications and we'll help you find the right machine.