500–1,000 Ton Injection Molding Machines (Used)
All used injection molding machines (63) →
See all 63 Injection Molding Machines →
18 results

Item #6449
Milacron VL-850 850-Ton Horizontal Injection Molding Machine
USA

Item #6274
2015 Engel Duo 650H/330W/200L 500 combi US - 3-Shot
Canada
VideoItem #6114
Husky 715 Ton Injection Molding Press, New in 2025
USA

Item #6003
2008 Milacron MM950
USA

Item #5996
2018 Arburg All Rounder 920S 500-2100/400 - 2-Shot
USA

Item #5851
Yizumi UN560A5 560 Metric Ton Injection Molding Press, New in 2021
Mexico

Lot 5 · Item #5321
Husky - HL500
USA · Register to see location
Ends Thu, Dec 17, 10:08 AM CT

Lot 6 · Item #5322
Husky - HL500
USA · Register to see location
Ends Thu, Dec 17, 10:10 AM CT

Lot 7 · Item #5323
Husky - HL500
USA · Register to see location
Ends Thu, Dec 17, 10:12 AM CT

Lot 8 · Item #5324
Husky - HL500
USA · Register to see location
Ends Thu, Dec 17, 10:14 AM CT

Lot 9 · Item #5325
Husky - HL500
USA · Register to see location
Ends Thu, Dec 17, 10:16 AM CT

Item #5467
Borche - BU600T
USA

Lot 4 · Item #5320
Husky - HL500
USA · Register to see location
Ends Thu, Dec 17, 10:06 AM CT

Item #5173
Husky - G600
USA

Lot 11 · Item #3332
Husky - HL500
USA · Register to see location
Ends Thu, Dec 17, 10:20 AM CT

Lot 10 · Item #5220
Husky - H500
USA · Register to see location
Ends Thu, Dec 17, 10:18 AM CT

Item #5451
Toyo - Si-750 III
USA

Item #6007
Uniloy-Springfield SF 750
USA
500-1000 Ton Injection Molding Machines by the numbers
From our own catalog: machines listed now and machines we have sold. Updated every few minutes.
Our track record
416 machines sold · 33 makes · model years 1985–2025 · 9 sold at our own auctions
By clamp force
| Clamp force | In stock now | Sold by Meadoworks |
|---|---|---|
| 500–999 tons | 18 | 381 |
| 1,000 tons and up | 0 | 35 |
By brand
| Brand | In stock now | Sold by Meadoworks | Model years |
|---|---|---|---|
| Husky | 10 | 51 | 1994–2025 |
| Milacron | 2 | 98 | 1989–2016 |
| Engel | 1 | 42 | 1988–2019 |
| Toyo | 1 | 5 | 2003–2007 |
| Arburg | 1 | 2 | 2015–2018 |
| Uniloy | 1 | 1 | 1997 |
| Yizumi | 1 | 1 | 2021 |
| Borche | 1 | 0 | 2020 |
| Nissei | 0 | 37 | 1992–2018 |
| Toshiba | 0 | 21 | 1987–2009 |
Spec ranges across our machines
| Spec | Range | Machines |
|---|---|---|
| Clamp force | 500–1,000 tons | 434 |
| Shot size | 6.5–362 oz | 393 |
| Screw diameter | 35–140 mm | 178 |
| Tie-bar spacing (first figure) | 27.6–108 in | 421 |
| Platen size (first figure) | 32–134 in | 400 |
Controls we see most: Camac (53), Polaris (21), Xtreem (18), Pathfinder (14), CC100 (13), NC9300T (13)
Looking for Something Specific?
Most of our inventory sells before we can list it online. If you need a specific brand, model, or specification, tell us what you need—we have access to unlisted equipment and machines coming in from plant closures.
Browse Used 500-1000 Ton Injection Molding Machines by Brand
Looking to Sell Your 500-1000 Ton?
Meadoworks is an active cash buyer of used industrial equipment. Get a free valuation from our AMEA-certified appraisers.
About Used 500-1000 Ton Injection Molding Machines
Large tonnage injection molding machines (500-1000 tons) are designed for molding substantial parts with large projected areas. These machines produce automotive bumpers and panels, large industrial containers, furniture components, pallets, and heavy-wall industrial parts. Higher clamp forces ensure flash-free molding of large parts and support multi-cavity tooling for medium-sized components.
How to Choose a Used 500–1,000 Ton Injection Molding Machine
Start at the mold and the building
Measure the mold first — tie-bar spacing, platen size, mold height and ejector stroke — then check the shot size for your part weight. At this size the building matters too: floor loading, power (often 480 V, 3-phase, high amperage), crane access for mold changes and cooling capacity.
By clamp force: Typical Used 500–1,000 Ton Price Ranges
500–700 tons: about $60,000–$250,000
700–1,000 tons: about $80,000–$350,000
Age and control, drive type, shot size, tie-bar spacing, hours and brand move the price. Budget separately for rigging and freight — often $10,000–$30,000+ at this size.
These are typical used-market ranges, not a quote on any machine. For a current figure on a specific machine, request a quote or call 800-323-0307.
500–1,000 Ton Injection Molding Machine Specs to Compare
| Spec | Typical range | Why it matters |
|---|---|---|
| Clamp (tons) | 500–1,000 tons | Covers parts of roughly 100–350+ square inches of projected area. |
| Shot size (oz) | About 60–250 oz (PS) | Large parts and multi-cavity molds need the shot. |
| Tie-bar spacing (in) | About 35 x 35 in to 55 x 50 in | Large molds must pass between the tie bars. |
| Mold height (in) | Your mold must fall inside the minimum and maximum. |
Clamp (tons)
Typical range: 500–1,000 tons
Covers parts of roughly 100–350+ square inches of projected area.
Shot size (oz)
Typical range: About 60–250 oz (PS)
Large parts and multi-cavity molds need the shot.
Tie-bar spacing (in)
Typical range: About 35 x 35 in to 55 x 50 in
Large molds must pass between the tie bars.
Mold height (in)
Your mold must fall inside the minimum and maximum.
What to Inspect on a Used 500–1,000 Ton Injection Molding Machine
Screw, barrel and check ring
Run a shot and watch cushion and recovery; ask when the screw and barrel were last measured for wear.
Hydraulics
Look for leaks at the clamp cylinder, manifolds and hoses, take an oil sample and listen to the pump on load.
Clamp and platens
Check tie bars for scoring, platen parallelism and the toggle pins and bushings (toggle machines) for play.
Controls
Confirm the control powers up clean, the alarm history and that parts and support are still available for it.
Size for your molds
Measure tie-bar spacing, platen size, minimum and maximum mold height and ejector stroke against your largest mold.
More Injection Molding Machines types
Injection Molding Machines by Tonnage
Common Applications
Frequently Asked Questions
What applications require 500-1000 ton injection molding machines?
Large tonnage machines are needed for parts with significant projected areas (100-350+ square inches) including automotive exterior panels, bumpers, large containers, furniture, pallets, and heavy-wall industrial parts. They're also used for multi-cavity molds producing medium parts at high volumes.
What infrastructure is needed for large tonnage machines?
500-1000 ton machines require substantial infrastructure: reinforced floors, high electrical capacity (often 480V/3-phase), adequate ceiling height, large compressed air supply, and significant cooling capacity. Plan for rigging equipment and adequate aisle space for mold changes.
Are used large tonnage machines a good value?
Yes, used large tonnage machines often offer excellent value because the secondary market has fewer buyers for big machines. Well-maintained used machines from quality brands can save 40-60% versus new while providing years of productive service.
How much does a used 500–1,000 ton injection molding machine cost?
Typical used-market ranges: 500–700 tons about $60,000–$250,000, and 700–1,000 tons about $80,000–$350,000. Age, control, drive type, shot size, hours and brand move the price, and rigging and freight for a press this size add $10,000–$30,000+. Call 800-323-0307 for a current figure on a specific machine.
What brands are common at 500–1,000 tons?
Cincinnati Milacron, Van Dorn, Husky, Engel, Haitian, Krauss Maffei, UBE and HPM are the makes most often found used at this size; Milacron and Engel are the injection molding makes Meadoworks has sold most overall.
Related Resources
Recently Sold 500-1000 Ton Injection Molding Machines
View all sold injection molding machines →Need Help Finding the Right Tonnage?
Not sure what tonnage you need? Contact our team with your part specifications and we'll help you determine the right machine size for your application.



