Used Hydraulic Plastic Injection Molding Machines for Sale
All used injection molding machines (63) →
See all 63 Injection Molding Machines →
37 results
VideoItem #6114
Husky 715 Ton Injection Molding Press, New in 2025
USA

Lot 1 · Item #6951
2023 Engel Victory 450 Ton 2-Shot Molder
USA · Register to see location
Ends Thu, Dec 10, 10:00 AM CT · 1 bid

Lot 1 · Item #6026
2023 Borche BU3300-V
USA · Register to see location
Ends Thu, Dec 17, 10:00 AM CT

Item #5851
Yizumi UN560A5 560 Metric Ton Injection Molding Press, New in 2021
Mexico

Item #5624
Wittmann - MicroPower 15 / 10 H
USA

Item #5467
Borche - BU600T
USA

Item #6584
2018 Milacron MTs-400, 400-Ton Injection Molding Machine
USA

Item #6583
2018 Milacron MTs-400 400-Ton Injection Molding Machine
USA

Item #5996
2018 Arburg All Rounder 920S 500-2100/400 - 2-Shot
USA

Item #6271
2017 Krauss Maffei KM 450-750/380 GXZ - 2-Shot
Canada

Item #5628
Woojin - TH500S
USA
VideoLot 1 · Item #6960
2015 Engel Duo 3500 Ton Injection Molder
USA · Register to see location
Ends Tue, Dec 15, 10:00 AM CT · 1 bid

Item #6285
2015 Krauss Maffei KM 350-750-380 - 3-Shot
Mexico

Item #6274
2015 Engel Duo 650H/330W/200L 500 combi US - 3-Shot
Canada

Item #6273
2013 Krauss Maffei KM 350-750-380 - 2-Shot
Canada

Item #6272
2013 Krauss Maffei KM 420-1400-750 CXZ - 2-Shot
Canada

Lot 1 · Item #6939
2008 Haitian 250 Ton Injection Molding Press
Gilberts, IL
Ends Wed, Dec 2, 10:00 AM CT · 2 bids

Lot 3 · Item #6937
2008 Haitian 90 Ton Injection Molding Press
Gilberts, IL
Ends Wed, Dec 2, 10:04 AM CT

Lot 2 · Item #6938
2008 Haitian 160 Ton Injection Molding Press
Gilberts, IL
Ends Wed, Dec 2, 10:02 AM CT

Item #6003
2008 Milacron MM950
USA

Lot 10 · Item #5220
Husky - H500
USA · Register to see location
Ends Thu, Dec 17, 10:18 AM CT

Item #5702
Milacron - MG 2300
USA

Item #6255
2006 Husky HL160
USA

Lot 11 · Item #3332
Husky - HL500
USA · Register to see location
Ends Thu, Dec 17, 10:20 AM CT
Hydraulic Injection Molding Machines by the numbers
From our own catalog: machines listed now and machines we have sold. Updated every few minutes.
Our track record
62 machines sold · 15 makes · model years 1988–2023 · 35 sold at our own auctions
By clamp force
| Clamp force | In stock now | Sold by Meadoworks |
|---|---|---|
| Under 100 tons | 8 | 15 |
| 100–299 tons | 3 | 16 |
| 300–499 tons | 10 | 11 |
| 500–999 tons | 10 | 13 |
| 1,000 tons and up | 6 | 4 |
By brand
| Brand | In stock now | Sold by Meadoworks | Model years |
|---|---|---|---|
| Milacron | 7 | 14 | 1995–2018 |
| Krauss Maffei | 5 | 5 | 1998–2018 |
| Husky | 5 | 0 | 2000–2025 |
| Engel | 4 | 3 | 2006–2023 |
| Haitian | 3 | 0 | 2008 |
| Autojectors | 2 | 0 | 1992–1998 |
| Borche | 2 | 0 | 2020–2023 |
| Uniloy | 2 | 0 | — |
| Arburg | 1 | 20 | 1988–2022 |
| Nissei | 1 | 4 | 2000–2006 |
Spec ranges across our machines
| Spec | Range | Machines |
|---|---|---|
| Clamp force | 15–3,709 tons | 96 |
| Shot size | 0.4–1,468 oz | 76 |
| Screw diameter | 15–160 mm | 45 |
| Tie-bar spacing (first figure) | 8.7–88 in | 63 |
| Platen size (first figure) | 6–120 in | 67 |
Controls we see most: KEBA (9), Selogica (7), CAMAC (5), MC6 (4), BR (3), CC300 (3)
Looking for Something Specific?
Most of our inventory sells before we can list it online. If you need a specific brand, model, or specification, tell us what you need—we have access to unlisted equipment and machines coming in from plant closures.
Browse Used Hydraulic Injection Molding Machines by Brand
Browse Used Hydraulic Injection Molding Machines by Country
Looking to Sell Your Hydraulic Injection Molding Machines?
Meadoworks is an active cash buyer of used industrial equipment. Get a free valuation from our AMEA-certified appraisers.
About Used Hydraulic Injection Molding Machines
Hydraulic plastic injection molding machines (also known as hydraulic plastic moulding machines) remain the workhorse of the plastics industry. Using hydraulic pumps and cylinders to power clamp, injection, and ejection movements, these machines offer proven reliability, lower purchase prices compared to all-electric alternatives, and availability in very large tonnages up to 6,000+ tons.
When evaluating a used hydraulic injection molding machine, inspect the hydraulic system carefully — check for leaks, oil condition, pump pressure, and valve response. Modern variable-displacement pump systems offer significant energy savings over older fixed-pump designs. Servo-hydraulic systems provide improved precision while maintaining the cost advantages of hydraulic technology.
Hydraulic machines make up most of the injection molding machines Meadoworks lists, from small presses under 50 tons to large machines over 3,000 tons. Milacron (including Cincinnati Milacron), Krauss Maffei, Husky, Engel and Haitian are the makes we list most often. Contact us at 800-323-0307 for current availability.
How to Choose a Used Hydraulic Injection Molding Machine
Pump, oil, and clamp
A hydraulic press makes clamp and injection force with oil. Older machines use a fixed pump and a lot of heat. Later ones use a variable pump or a servo pump and waste less energy. The oil, the heat exchanger, and the valves are the machine you are buying, along with the screw and the platens.
Clamp style is still toggle or direct hydraulic. Toggle is faster. Direct hydraulic is steadier across a large platen. Do not treat every hydraulic press as the same clamp.
Where it still wins
High clamp force, a simple maintenance story, and a lower price than a late electric are why these presses stay in general-purpose shops. They are a poorer fit for a cleanroom or a press that must hold a tiny cushion all day.
Shot, tie bars, and daylight are the same fit checks as on any horizontal press. Oil temperature that runs away is a heat exchanger or a relief valve, and it will cook the oil and the seals.
Hydraulic Injection Molding Machine Specs to Compare
| Spec | Why it matters |
|---|---|
| Clamp (tons) | Match projected area. Extra tons do not enlarge the tie bars. |
| Shot size (oz) | Cover the part and the runner with cushion left. A worn non-return valve will not hold that cushion. |
| Pump style | Fixed, variable, or servo pump changes the energy and the heat. Read it off the power unit, not the color of the guards. |
| Oil reservoir | A small tank on a large press runs hot. Heat is how seals and valves die. |
Clamp (tons)
Match projected area. Extra tons do not enlarge the tie bars.
Shot size (oz)
Cover the part and the runner with cushion left. A worn non-return valve will not hold that cushion.
Pump style
Fixed, variable, or servo pump changes the energy and the heat. Read it off the power unit, not the color of the guards.
Oil reservoir
A small tank on a large press runs hot. Heat is how seals and valves die.
What to Inspect on a Used Hydraulic Injection Molding Machine
Look at the oil
Milky oil is water. Black oil is heat. Either one is a bill, not a cosmetic.
Feel the heat exchanger
If the oil climbs past the setpoint and stays there, the cooler or the water supply is done.
Cycle injection and hold
A cushion that will not repeat is a worn valve, screw, or barrel.
Walk the hoses
Weeping fittings and a soft hose at the clamp are the leaks you will chase on the first shift.
Related Equipment
- Water Temperature Controllers
Hold the mold at a setpoint
- Desiccant Dryers
Dry the resin before it reaches the screw
- Used All-Electric Injection Molding Machines
Servo drives for precision and lower energy
More Injection Molding Machines types
Types of Injection Molding
Common Applications
Frequently Asked Questions
How much does a used hydraulic injection molding machine cost?
Used hydraulic plastic injection molding machines are typically the most affordable option in the used market. Small (50-200 tons): $10,000-$60,000. Medium (200-500 tons): $30,000-$120,000. Large (500-1000 tons): $50,000-$250,000. Very large (1000+ tons): $100,000-$500,000+. Prices are 20-40% below comparable all-electric models. Request a quote on any listing or call 800-323-0307 for a current price.
What is a hydraulic plastic moulding machine?
A hydraulic plastic moulding machine (also spelled molding) uses hydraulic pumps and cylinders to generate the force needed for clamping the mold, injecting molten plastic, and ejecting finished parts. Hydraulic oil is pressurized by pumps and directed through valves to hydraulic cylinders. This is the original and most common type of injection molding machine technology.
What should I check on a used hydraulic injection molding machine?
Look for oil leaks at the cylinders, manifolds and hoses, take an oil sample, and watch the pump on load — noise or slow pressure build points to a worn pump. Check the platen and tie bars for wear, run the screw and check ring through a shot, and confirm the control still has parts support. Ask whether the pump is fixed, variable-displacement or servo; it changes the power bill.
Are hydraulic injection molding machines still worth buying?
For general molding, large parts and high tonnage, yes. They cost less to buy used than all-electric presses, hold clamp force in thick-wall parts and are simple to service. Most of the injection molding machines Meadoworks lists are hydraulic, from under 50 tons to over 3,000 tons.
What is a servo-hydraulic injection molding machine?
A hydraulic press whose pump is driven by a servo motor that only runs as fast as the cycle needs. It keeps hydraulic clamp force and simplicity but cuts energy use well below a fixed-pump machine, and many 2010-and-later presses (Haitian Mars, Engel Victory and Duo with servo pumps) are built this way.
Related Resources
Recently Sold Hydraulic Injection Molding Machines
View all sold injection molding machines →Need Help Finding the Right Equipment?
Contact our team with your specifications and we'll help you find the right machine.


