Skip to main content

Used Hydraulic Plastic Injection Molding Machines for Sale

All used injection molding machines (63) →


See all 63 Injection Molding Machines →

Recently sold

Used 2018 Krauss Maffei KM 900-12000 GX Injection Molding Machines: HorizontalSOLD

Item #6208

2018 Krauss Maffei KM 900-12000 GX

USA

View details
Used 1997 Arburg Allrounder 270 M 500-90 V0 Injection Molding Machines: VerticalSOLD

Item #6693

Arburg 56 Ton Vertical Clamp Injection Molding Machine

USA

View details
Used 2010 Battenfeld VM 270/750V R 1755 Injection Molding Machines: VerticalSOLD

Item #5994

2010 Battenfeld VM 270/750V R 1755 Vertical/Vertical Injection Molding Machine

USA

View details
Used 2012 Battenfeld HM 240/1330 Injection Molding Machines: HorizontalSOLD

Item #5997

2012 Battenfeld HM 240/1330 Injection Molding Machine

USA

View details
Used 2006 Battenfeld Vertical R 150/400V Injection Molding Machines: VerticalSOLD

Item #5993

2006 Battenfeld Vertical R 150/400V Vertical/Vertical Injection Molding Machine

USA

View details
Used 1989 Arburg Allrounder 220-90-350 D Injection Molding Machines: VerticalSOLD

Item #6697

Arburg 39 Ton Vertical Clamp Injection Molding Machine

USA

View details
Used 1988 Arburg Allrounder 270-210-500 D Injection Molding Machines: HorizontalSOLD

Item #6698

Arburg 56 Ton Injection Molding Machine

USA

View details
Used 2000 Arburg Allrounder 570 C 2000-675 Injection Molding Machines: HorizontalSOLD

Item #5999

Arburg Allrounder 570 C 2000-675 Injection Molding Machine

USA

View details
Used 1990 Arburg Allrounder 270 D 350-90 Injection Molding Machines: HorizontalSOLD

Item #6696

Arburg 39 Ton Injection Molding Machine

USA

View details
Used 1991 Arburg Allrounder 270 M 500-90 Injection Molding Machines: VerticalSOLD

Item #6694

Arburg 56 Ton Vertical Clamp Injection Molding Machine

USA

View details
Used 1996 Arburg Allrounder Centex 270 C 500-100 Injection Molding Machines: HorizontalSOLD

Item #6699

Arburg 56 Ton Injection Molding Machine

USA

View details
Used 1991 Arburg Allrounder 270 M 350-90 Injection Molding Machines: VerticalSOLD

Item #6695

Arburg Vertical Clamp Injection Molding Machine

USA

View details
Used 2003 Nissei FN7000 Injection Molding Machines: HorizontalSOLD

Item #6936

2003 Nissei FN7000 Injection Molder

USA

View details
Used 2003 Milacron MT450-26, Injection Molding Machines: HorizontalSOLD

Item #6459

Milacron 450 Ton Injection Molding Press

USA

View details
Used 1999 Cincinnati Milacron VS 120-7.60, Injection Molding Machines: HorizontalSOLD

Item #6458

Cincinnati Milacron 120 Ton Injection Molding Press

USA

View details
Used 2012 Milacron MTs-400 Injection Molding Machines: HorizontalSOLD

Item #6282

2012 Milacron MTs-400

USA

View details
Used 2002 Arburg Allrounder 320 K5 700-250, Injection Molding Machines: HorizontalSOLD

Item #6452

Arburg 78 Ton Injection Molding Press

USA

View details
Used Cincinnati Milacron VT-165-11, Injection Molding Machines: HorizontalSOLD

Item #6453

Cincinnati Milacron 165 Ton Injection Molding Press

USA

View details
Used Cincinnati Milacron VSX55-2.27, Injection Molding Machines: HorizontalSOLD

Item #6451

Cincinnati Milacron 55 Ton Injection Molding Press

USA

View details
Used 1996 Cincinnati Milacron VT 220-17, Injection Molding Machines: HorizontalSOLD

Item #6454

Cincinnati Milacron 220 Ton Injection Molding Press

USA

View details
Used 1995 Cincinnati Milacron VT 300-29, Injection Molding Machines: HorizontalSOLD

Item #6456

Cincinnati Milacron 300 Ton Injection Molding Press

USA

View details
Used Cincinnati Milacron VT-300-29, Injection Molding Machines: HorizontalSOLD

Item #6455

Cincinnati Milacron 300 Ton Injection Molding Press

USA

View details
Used 2015 Arburg 920S 5000-1300/400 - 2-Shot Injection Molding Machines: HorizontalSOLD

Item #6050

2015 Arburg 920S 5000-1300/400 - 2-Shot

USA

View details
Used 2019 Engel DUO 1560/500 US Injection Molding Machines: HorizontalSOLD

Item #5531

Engel - DUO 1560/500 US

USA

View details

Hydraulic Injection Molding Machines by the numbers

From our own catalog: machines listed now and machines we have sold. Updated every few minutes.

Our track record

62 machines sold · 15 makes · model years 1988–2023 · 35 sold at our own auctions

By clamp force

Clamp forceIn stock nowSold by Meadoworks
Under 100 tons815
100–299 tons316
300–499 tons1011
500–999 tons1013
1,000 tons and up64

By brand

BrandIn stock nowSold by MeadoworksModel years
Milacron7141995–2018
Krauss Maffei551998–2018
Husky502000–2025
Engel432006–2023
Haitian302008
Autojectors201992–1998
Borche202020–2023
Uniloy20—
Arburg1201988–2022
Nissei142000–2006

Spec ranges across our machines

SpecRangeMachines
Clamp force15–3,709 tons96
Shot size0.4–1,468 oz76
Screw diameter15–160 mm45
Tie-bar spacing (first figure)8.7–88 in63
Platen size (first figure)6–120 in67

Controls we see most: KEBA (9), Selogica (7), CAMAC (5), MC6 (4), BR (3), CC300 (3)

Get alerts about new injection molding listings by email

Looking for Something Specific?

Most of our inventory sells before we can list it online. If you need a specific brand, model, or specification, tell us what you need—we have access to unlisted equipment and machines coming in from plant closures.

Looking to Sell Your Hydraulic Injection Molding Machines?

Meadoworks is an active cash buyer of used industrial equipment. Get a free valuation from our AMEA-certified appraisers.

Sell Your Equipment

About Used Hydraulic Injection Molding Machines

Hydraulic plastic injection molding machines (also known as hydraulic plastic moulding machines) remain the workhorse of the plastics industry. Using hydraulic pumps and cylinders to power clamp, injection, and ejection movements, these machines offer proven reliability, lower purchase prices compared to all-electric alternatives, and availability in very large tonnages up to 6,000+ tons.

When evaluating a used hydraulic injection molding machine, inspect the hydraulic system carefully — check for leaks, oil condition, pump pressure, and valve response. Modern variable-displacement pump systems offer significant energy savings over older fixed-pump designs. Servo-hydraulic systems provide improved precision while maintaining the cost advantages of hydraulic technology.

Hydraulic machines make up most of the injection molding machines Meadoworks lists, from small presses under 50 tons to large machines over 3,000 tons. Milacron (including Cincinnati Milacron), Krauss Maffei, Husky, Engel and Haitian are the makes we list most often. Contact us at 800-323-0307 for current availability.

How to Choose a Used Hydraulic Injection Molding Machine

Pump, oil, and clamp

A hydraulic press makes clamp and injection force with oil. Older machines use a fixed pump and a lot of heat. Later ones use a variable pump or a servo pump and waste less energy. The oil, the heat exchanger, and the valves are the machine you are buying, along with the screw and the platens.

Clamp style is still toggle or direct hydraulic. Toggle is faster. Direct hydraulic is steadier across a large platen. Do not treat every hydraulic press as the same clamp.

Where it still wins

High clamp force, a simple maintenance story, and a lower price than a late electric are why these presses stay in general-purpose shops. They are a poorer fit for a cleanroom or a press that must hold a tiny cushion all day.

Shot, tie bars, and daylight are the same fit checks as on any horizontal press. Oil temperature that runs away is a heat exchanger or a relief valve, and it will cook the oil and the seals.

Hydraulic Injection Molding Machine Specs to Compare

Clamp (tons)

Match projected area. Extra tons do not enlarge the tie bars.

Shot size (oz)

Cover the part and the runner with cushion left. A worn non-return valve will not hold that cushion.

Pump style

Fixed, variable, or servo pump changes the energy and the heat. Read it off the power unit, not the color of the guards.

Oil reservoir

A small tank on a large press runs hot. Heat is how seals and valves die.

What to Inspect on a Used Hydraulic Injection Molding Machine

  • Look at the oil

    Milky oil is water. Black oil is heat. Either one is a bill, not a cosmetic.

  • Feel the heat exchanger

    If the oil climbs past the setpoint and stays there, the cooler or the water supply is done.

  • Cycle injection and hold

    A cushion that will not repeat is a worn valve, screw, or barrel.

  • Walk the hoses

    Weeping fittings and a soft hose at the clamp are the leaks you will chase on the first shift.

Related Equipment

Common Applications

General purpose molding
Automotive
Large parts
Packaging
Industrial components
Construction products
Housewares

Frequently Asked Questions

How much does a used hydraulic injection molding machine cost?

Used hydraulic plastic injection molding machines are typically the most affordable option in the used market. Small (50-200 tons): $10,000-$60,000. Medium (200-500 tons): $30,000-$120,000. Large (500-1000 tons): $50,000-$250,000. Very large (1000+ tons): $100,000-$500,000+. Prices are 20-40% below comparable all-electric models. Request a quote on any listing or call 800-323-0307 for a current price.

What is a hydraulic plastic moulding machine?

A hydraulic plastic moulding machine (also spelled molding) uses hydraulic pumps and cylinders to generate the force needed for clamping the mold, injecting molten plastic, and ejecting finished parts. Hydraulic oil is pressurized by pumps and directed through valves to hydraulic cylinders. This is the original and most common type of injection molding machine technology.

What should I check on a used hydraulic injection molding machine?

Look for oil leaks at the cylinders, manifolds and hoses, take an oil sample, and watch the pump on load — noise or slow pressure build points to a worn pump. Check the platen and tie bars for wear, run the screw and check ring through a shot, and confirm the control still has parts support. Ask whether the pump is fixed, variable-displacement or servo; it changes the power bill.

Are hydraulic injection molding machines still worth buying?

For general molding, large parts and high tonnage, yes. They cost less to buy used than all-electric presses, hold clamp force in thick-wall parts and are simple to service. Most of the injection molding machines Meadoworks lists are hydraulic, from under 50 tons to over 3,000 tons.

What is a servo-hydraulic injection molding machine?

A hydraulic press whose pump is driven by a servo motor that only runs as fast as the cycle needs. It keeps hydraulic clamp force and simplicity but cuts energy use well below a fixed-pump machine, and many 2010-and-later presses (Haitian Mars, Engel Victory and Duo with servo pumps) are built this way.

Need Help Finding the Right Equipment?

Contact our team with your specifications and we'll help you find the right machine.