Used PET Preform Injection Molding Machines for Sale
All used injection molding machines (63) →
See all 63 Injection Molding Machines →
0 results
No matching equipment is listed online right now.
Most of our inventory sells before we can list it. Browse related equipment or tell us what you need — we source from plant closures across North America.
Related Equipment Available Now

Lot 1 · Item #7115
2021 Niigata MD110E Injection Molding Press
USA · Register to see location
Ends Mon, Dec 14, 10:00 AM CT

Lot 1 · Item #7111
2022 Engel 110-Ton All Electric Injection Molding Machine
USA · Register to see location
Ends Wed, Dec 16, 10:00 AM CT
VideoLot 1 · Item #6960
2015 Engel Duo 3500 Ton Injection Molder
USA · Register to see location
Ends Tue, Dec 15, 10:00 AM CT

Lot 1 · Item #6951
2023 Engel Victory 450 Ton 2-Shot Molder
USA · Register to see location
Ends Thu, Dec 10, 10:00 AM CT

Lot 2 · Item #6938
2008 Haitian 160 Ton Injection Molding Press
Gilberts, IL
Ends Wed, Dec 2, 10:00 AM CT

Lot 3 · Item #6937
2008 Haitian 90 Ton Injection Molding Press
Gilberts, IL
Ends Wed, Dec 2, 10:00 AM CT

Lot 1 · Item #6939
2008 Haitian 250 Ton Injection Molding Press
Gilberts, IL
Ends Wed, Dec 2, 10:00 AM CT

Lot 1 · Item #6895
2016 Arburg Allrounder 630 A 2500-400 Injection Molding Machine
USA · Register to see location
Taking offers · bidding opens Tue, Dec 1, 10:00 AM CT
PET Preform Injection Molding Machines by the numbers
From our own catalog: machines listed now and machines we have sold. Updated every few minutes.
Our track record
24 machines sold · 4 makes · model years 1991–2019
By clamp force
| Clamp force | In stock now | Sold by Meadoworks |
|---|---|---|
| 100–299 tons | 0 | 1 |
| 300–499 tons | 0 | 15 |
| 500–999 tons | 0 | 8 |
Spec ranges across our machines
| Spec | Range | Machines |
|---|---|---|
| Clamp force | 276–600 tons | 24 |
| Tie-bar spacing (first figure) | 28.3–40 in | 19 |
| Platen size (first figure) | 34.6–51.5 in | 19 |
Controls we see most: Siemens (4)
Looking for Something Specific?
Most of our inventory sells before we can list it online. If you need a specific brand, model, or specification, tell us what you need—we have access to unlisted equipment and machines coming in from plant closures.
Browse Used PET Preform Injection Molding Machines by Brand
Looking to Sell Your PET Preform Injection Molding Machines?
Meadoworks is an active cash buyer of used industrial equipment. Get a free valuation from our AMEA-certified appraisers.
About Used PET Preform Injection Molding Machines
PET preform injection molding machines are high-output systems designed specifically for producing PET (polyethylene terephthalate) preforms — the test-tube-shaped intermediate product that is subsequently reheated and stretch blow molded into bottles. These machines require specialized screws optimized for PET processing, high injection speeds, precision cooling systems, and multi-cavity molds (typically 48 to 144+ cavities).
The PET preform market demands machines capable of very fast cycle times (typically 8-12 seconds), extreme consistency for wall thickness distribution, and high uptime for 24/7 production. Husky dominates this market segment with their HyPET and HyCAP platforms.
Meadoworks has sold more than 20 used PET preform systems, most of them Husky; Netstal, SIPA and Nissei ASB systems also come up. Contact us at 800-323-0307 for current availability.
How to Choose a Used PET Preform Injection Molding Machine
A press built for preforms
A PET preform machine injects a test-tube-shaped preform that a stretch-blow molder later turns into a bottle. The neck finish is molded here and never changes in the blow step. Cavitation, cycle time, and the hot runner are the machine. A general-purpose press can mold a preform. A dedicated preform system holds the neck, cools it, and drops a preform a blow molder will accept.
Shot and cavitation have to agree. A 72-cavity tool needs a plasticizing rate the screw can recover before the cooling of the neck is done.
Hot runner and takeout
Preform molds are hot-runner molds. Valve gates, the manifold, and the controller are part of the tool as much as the press. A robot or a cooling takeout has to catch the preforms without scarring the neck. A press sold without the mold still has to match the shut height and the takeout the mold expects.
Resin is PET. Drying is not optional. A wet preform is a hazy bottle.
By brand
Husky: HyPET systems — by far the make we have sold most for PET preforms.
Netstal: PET-Line preform systems; we have sold Netstal.
Engel: Preform versions of its presses; we have sold Engel preform machines.
Sacmi and KraussMaffei: Preform systems seen less often on the used market.
PET Preform Injection Molding Machine Specs to Compare
| Spec | Typical range | Why it matters |
|---|---|---|
| Cavities | Often 24–144 | Rate is cavities times cycle. The screw has to recover that shot. |
| Cycle (sec) | Often about 8–15 sec | Neck cooling sets the floor. A quoted cycle on a lighter preform is not your cycle. |
| Clamp (tons) | Has to hold the hot-runner tool. Cavitation drives the tons more than the preform weight. | |
| Neck finish | The finish is cut in this mold. The blow molder cannot change it. |
Cavities
Typical range: Often 24–144
Rate is cavities times cycle. The screw has to recover that shot.
Cycle (sec)
Typical range: Often about 8–15 sec
Neck cooling sets the floor. A quoted cycle on a lighter preform is not your cycle.
Clamp (tons)
Has to hold the hot-runner tool. Cavitation drives the tons more than the preform weight.
Neck finish
The finish is cut in this mold. The blow molder cannot change it.
What to Inspect on a Used PET Preform Injection Molding Machine
Ask if the mold is included
A preform press without the cavity and the hot runner is a clamp. Price them separately in your head.
Heat the manifold
Open zones and a dead thermocouple scrap a cavity. Cycle the controller.
Watch takeout
Necks get scratched here. The cooling tube or the robot has to match the cavity count.
Confirm PET drying
The dryer is a separate machine. The press will not dry the resin.
Related Equipment
- Desiccant Dryers
Dry the resin before it reaches the screw
- Stretch Blow Molding
The machine that blows these preforms
More Injection Molding Machines types
Types of Injection Molding
Common Applications
Frequently Asked Questions
What is a PET preform injection molding machine?
A PET preform injection molding machine is a high-speed, multi-cavity system designed to produce PET preforms — the intermediate product that gets stretch blow molded into bottles. These machines feature PET-specific screws, rapid cooling systems, and molds with 48-144+ cavities for high-volume production.
How much does a used PET preform machine cost?
Used PET preform injection molding systems (machine + mold) typically range from $200,000-$1,000,000+ depending on cavity count, output capacity, brand, and condition. Husky HyPET systems are the most common and command premium resale values due to market dominance. Contact Meadoworks at 800-323-0307.
What should I check on a used PET preform system?
The mold and hot runner first — cavity count, neck finish and wear decide what the system can make. Then the injection unit and screw, the post-mold cooling and robot, the dryer and the chiller. Ask for the cycle time and preform weight it last ran.
Is the mold included with a used PET preform machine?
Often, but not always. A system sold with its preform mold and hot runner is worth much more than the press alone, and a mold for your neck finish can cost as much as the machine. Check the cavity count and finish before you compare prices.
What tonnage are PET preform injection molding machines?
Most preform systems are 150 to 600 tons. The PET preform machines we have sold, mostly Husky, ran from about 276 to 600 tons.
Related Resources
Recently Sold PET Preform Injection Molding Machines
View all sold injection molding machines →Need Help Finding the Right Equipment?
Contact our team with your specifications and we'll help you find the right machine.

