Used Liquid Silicone Rubber (LSR) Injection Molding Machines for Sale
All used injection molding machines (63) →
See all 63 Injection Molding Machines →
0 results
No matching equipment is listed online right now.
Most of our inventory sells before we can list it. Browse related equipment or tell us what you need — we source from plant closures across North America.
Related Equipment Available Now

Lot 1 · Item #7115
2021 Niigata MD110E Injection Molding Press
USA · Register to see location
Ends Mon, Dec 14, 10:00 AM CT

Lot 1 · Item #7111
2022 Engel 110-Ton All Electric Injection Molding Machine
USA · Register to see location
Ends Wed, Dec 16, 10:00 AM CT
VideoLot 1 · Item #6960
2015 Engel Duo 3500 Ton Injection Molder
USA · Register to see location
Ends Tue, Dec 15, 10:00 AM CT

Lot 1 · Item #6951
2023 Engel Victory 450 Ton 2-Shot Molder
USA · Register to see location
Ends Thu, Dec 10, 10:00 AM CT

Lot 3 · Item #6937
2008 Haitian 90 Ton Injection Molding Press
Gilberts, IL
Ends Wed, Dec 2, 10:00 AM CT

Lot 1 · Item #6939
2008 Haitian 250 Ton Injection Molding Press
Gilberts, IL
Ends Wed, Dec 2, 10:00 AM CT

Lot 2 · Item #6938
2008 Haitian 160 Ton Injection Molding Press
Gilberts, IL
Ends Wed, Dec 2, 10:00 AM CT

Lot 1 · Item #6895
2016 Arburg Allrounder 630 A 2500-400 Injection Molding Machine
USA · Register to see location
Taking offers · bidding opens Tue, Dec 1, 10:00 AM CT
LSR Injection Molding Machines by the numbers
From our own catalog: machines listed now and machines we have sold. Updated every few minutes.
Our track record
13 machines sold · model years 1999–2021
By clamp force
| Clamp force | In stock now | Sold by Meadoworks |
|---|---|---|
| Under 100 tons | 0 | 12 |
| 300–499 tons | 0 | 1 |
Spec ranges across our machines
| Spec | Range | Machines |
|---|---|---|
| Clamp force | 35–495 tons | 13 |
| Shot size | 0.4–34.1 oz | 10 |
| Tie-bar spacing (first figure) | 10.6–32.2 in | 13 |
| Platen size (first figure) | 15–44.9 in | 12 |
Looking for Something Specific?
Most of our inventory sells before we can list it online. If you need a specific brand, model, or specification, tell us what you need—we have access to unlisted equipment and machines coming in from plant closures.
Browse Used LSR Injection Molding Machines by Brand
Looking to Sell Your LSR Injection Molding Machines?
Meadoworks is an active cash buyer of used industrial equipment. Get a free valuation from our AMEA-certified appraisers.
About Used LSR Injection Molding Machines
Liquid Silicone Rubber (LSR) injection molding machines are specialized for processing two-component silicone materials that cure in a heated mold. LSR molding (also called silicone injection machine technology or soft plastic injection molding) produces parts with exceptional biocompatibility, heat resistance (-60°C to 200°C+), chemical resistance, and flexibility. LSR parts are used in medical devices, baby products, automotive seals, kitchen utensils, and wearable electronics.
LSR injection machines feature specialized metering and mixing systems, cold-deck molds, and precise temperature control. The material is pumped as a liquid from drums, mixed at a precise ratio, and injected into a heated mold where it cross-links into a solid elastomer.
LSR machines on the used market come from Engel, Arburg, Boy, Nissei and Krauss Maffei. A used LSR press may be sold with or without its metering unit, so confirm which before you compare machines. Contact us at 800-323-0307 for soft plastic injection molding machine availability.
How to Choose a Used LSR Injection Molding Machine
A meter, a mixer, and a cold mold
Liquid silicone rubber is pumped as two parts, mixed, and injected into a hot mold. The barrel is cooled so the material does not cure in the screw. The mold is hot so it cures in the cavity. That is the opposite of thermoplastic molding. A standard press with a thermoplastic screw will not run LSR without a pump, a mixer, and a shutoff nozzle built for it.
The ratio of the two parts has to stay put. A pump that drifts makes a part that will not cure, or that cures in the mixer.
What to buy with the press
Look for the metering pumps, the static mixer or the screw mixer, and the water on the barrel. Mold temperature, often around 150 to 200 C, is what cures the shot. Cold-runner or valve-gate tooling is common so you do not waste cured rubber in a sprue.
Medical and baby-care tools care about a clean pump and a press that has not run a filled thermoplastic through the same barrel.
By brand
Arburg: Allrounder LSR packages; one of the two makes we have sold most for silicone.
Sodick: V-LINE presses used for LSR; the other make we have sold most.
Engel: LIM and LSR packages on its presses.
KraussMaffei and Wittmann Battenfeld: LSR versions of their standard presses.
LSR Injection Molding Machine Specs to Compare
| Spec | Typical range | Why it matters |
|---|---|---|
| Shot (cc) | LSR shots are small. The pump and the screw have to meter that volume, not a thermoplastic ounce. | |
| Clamp (tons) | Usually modest. Flash on LSR is a clamp and a mold face problem, not a need for huge tons. | |
| Mold temperature (C) | Often about 150–200 C | The mold cures the rubber. The barrel must stay cold. |
| Mix ratio | Typically 1:1. A pump that cannot hold it will not make a cured part. |
Shot (cc)
LSR shots are small. The pump and the screw have to meter that volume, not a thermoplastic ounce.
Clamp (tons)
Usually modest. Flash on LSR is a clamp and a mold face problem, not a need for huge tons.
Mold temperature (C)
Typical range: Often about 150–200 C
The mold cures the rubber. The barrel must stay cold.
Mix ratio
Typically 1:1. A pump that cannot hold it will not make a cured part.
What to Inspect on a Used LSR Injection Molding Machine
Find the pumps
No metering unit means this is not an LSR press, whatever the guard says.
Confirm barrel cooling
Water on the barrel has to flow. A warm barrel cures the mix before the mold.
Look at the mixer
A clogged static mixer or a scored screw mixer is scrap and downtime.
Check the nozzle shutoff
LSR drools. The shutoff has to close.
Related Equipment
- Water Temperature Controllers
Hold the mold at a setpoint
More Injection Molding Machines types
Types of Injection Molding
Common Applications
Frequently Asked Questions
What is LSR injection molding?
LSR (Liquid Silicone Rubber) injection molding uses a two-component silicone material that is mixed and injected as a liquid into a heated mold where it cross-links into a flexible, durable elastomer. Unlike thermoplastic injection molding, LSR uses a cold-deck system and heated mold. The resulting parts are biocompatible, heat-resistant, and chemically inert.
How much does a used silicone injection machine cost?
Used LSR/silicone injection molding machines typically range from $50,000-$200,000+ depending on tonnage, brand, metering system, and condition. The specialized metering and pumping equipment adds cost compared to standard injection molding machines. Contact Meadoworks at 800-323-0307 for current pricing.
What equipment does an LSR molding cell need?
The press with an LSR screw, shut-off nozzle and cooled injection unit, a two-component metering pump (Graco, Elmet, Nordson or similar), a heated mold and usually a cold-deck or valve-gated runner. Buy the press and metering system together when you can.
Can a standard injection molding machine run liquid silicone?
Only with the LSR package: a non-return screw for low-viscosity silicone, a water-cooled barrel and nozzle, a shut-off nozzle and a metering pump. A standard thermoplastic press without these will leak and cure in the barrel.
What tonnage do LSR injection molding machines come in?
Mostly 35 to 500 tons — LSR runs at low injection pressure, so small presses run many cavities. The silicone machines we have sold ranged from 35 to about 495 tons.
Related Resources
Recently Sold LSR Injection Molding Machines
View all sold injection molding machines →Need Help Finding the Right Equipment?
Contact our team with your specifications and we'll help you find the right machine.


