Used 150-500 Ton Injection Molding Machines for Sale
All used injection molding machines (63) →
See all 63 Injection Molding Machines →
7 results

Lot 1 · Item #6951
2023 Engel Victory 450 Ton 2-Shot Molder
USA · Register to see location
Ends Thu, Dec 10, 10:00 AM CT · 1 bid

Lot 2 · Item #6938
2008 Haitian 160 Ton Injection Molding Press
Gilberts, IL
Ends Wed, Dec 2, 10:02 AM CT

Lot 1 · Item #6939
2008 Haitian 250 Ton Injection Molding Press
Gilberts, IL
Ends Wed, Dec 2, 10:00 AM CT · 2 bids

Lot 1 · Item #6895
2016 Arburg Allrounder 630 A 2500-400 Injection Molding Machine
USA · Register to see location
Taking offers · bidding opens Tue, Dec 1, 10:00 AM CT

Lot 3 · Item #6885
2019 Nissei NEX220IV All Electric Injection Molding Machine
USA · Register to see location
Ends Thu, Dec 17, 10:04 AM CT

Lot 2 · Item #6382
2019 Nissei 398 Ton Injection Molding Press w/Transformers, New in 2019
USA · Register to see location
Ends Thu, Dec 17, 10:02 AM CT

Lot 11 · Item #3332
Husky - HL500
USA · Register to see location
Ends Thu, Dec 17, 10:20 AM CT
150-500 Ton Injection Molding Machines by the numbers
From our own catalog: machines listed now and machines we have sold. Updated every few minutes.
Our track record
1,074 machines sold · 49 makes · model years 1985–2023 · 28 sold at our own auctions
By clamp force
| Clamp force | In stock now | Sold by Meadoworks |
|---|---|---|
| 100–299 tons | 6 | 540 |
| 300–499 tons | 16 | 424 |
| 500–999 tons | 2 | 110 |
By brand
| Brand | In stock now | Sold by Meadoworks | Model years |
|---|---|---|---|
| Krauss Maffei | 6 | 41 | 1993–2023 |
| Engel | 4 | 167 | 1987–2023 |
| Milacron | 2 | 189 | 1989–2021 |
| Nissei | 2 | 106 | 1987–2023 |
| Husky | 2 | 71 | 1991–2008 |
| JSW | 2 | 35 | 1990–2019 |
| Haitian | 2 | 4 | 2008–2014 |
| Arburg | 1 | 39 | 1998–2018 |
| Toyo | 1 | 16 | 1991–2014 |
| Sandretto | 1 | 4 | 1994–2000 |
Spec ranges across our machines
| Spec | Range | Machines |
|---|---|---|
| Clamp force | 150–500 tons | 1098 |
| Shot size | 3.4–176 oz | 982 |
| Screw diameter | 20–140 mm | 477 |
| Tie-bar spacing (first figure) | 16–56 in | 952 |
| Platen size (first figure) | 16–98 in | 938 |
Controls we see most: CAMAC (84), CC100 (46), Pathfinder (44), TACT (41), Injectvisor (31), Unilog (26)
Looking for Something Specific?
Most of our inventory sells before we can list it online. If you need a specific brand, model, or specification, tell us what you need—we have access to unlisted equipment and machines coming in from plant closures.
Browse Used 150-500 Ton Injection Molding Machines by Brand
Looking to Sell Your 150-500 Ton?
Meadoworks is an active cash buyer of used industrial equipment. Get a free valuation from our AMEA-certified appraisers.
About Used 150-500 Ton Injection Molding Machines
Medium tonnage injection molding machines (150-500 tons) represent the most versatile range for general-purpose molding. These machines handle a wide variety of parts including automotive components, appliance housings, industrial containers, housewares, and packaging. This tonnage range offers the best balance of capability, cost, and flexibility for most custom molders and OEM production.
How to Choose a Used 150–500 Ton Injection Molding Machine
Size the press to the mold, then the shot
Start with the mold: tie-bar spacing, platen size and mold height decide which presses it fits. Then check clamp force against projected area (2–5 tons per square inch) and that the shot uses 20–80% of the barrel. A press sized only on tonnage often turns out too small between the tie bars.
By clamp force: Typical Used 150–500 Ton Price Ranges
150–250 tons: about $25,000–$90,000
250–350 tons: about $35,000–$120,000
350–500 tons: about $45,000–$175,000
Age and control, drive type (hydraulic, servo-hydraulic, hybrid or all-electric — all-electrics run 20–40% higher), shot size, hours, robot and auxiliaries included, and brand move the price most.
These are typical used-market ranges, not a quote on any machine. For a current figure on a specific machine, request a quote or call 800-323-0307.
150–500 Ton Injection Molding Machine Specs to Compare
| Spec | Typical range | Why it matters |
|---|---|---|
| Clamp (tons) | 150–500 tons | Must cover your part's projected area at 2–5 tons per square inch. |
| Shot size (oz) | About 10–80 oz (PS) | The part and runner should use 20–80% of it. |
| Tie-bar spacing (in) | About 20 x 20 in to 35 x 35 in | Your mold has to pass between the tie bars. |
| Mold height (in) | Your mold must fall inside the minimum and maximum. |
Clamp (tons)
Typical range: 150–500 tons
Must cover your part's projected area at 2–5 tons per square inch.
Shot size (oz)
Typical range: About 10–80 oz (PS)
The part and runner should use 20–80% of it.
Tie-bar spacing (in)
Typical range: About 20 x 20 in to 35 x 35 in
Your mold has to pass between the tie bars.
Mold height (in)
Your mold must fall inside the minimum and maximum.
What to Inspect on a Used 150–500 Ton Injection Molding Machine
Screw, barrel and check ring
Run a shot and watch cushion and recovery; ask when the screw and barrel were last measured for wear.
Hydraulics
Look for leaks at the clamp cylinder, manifolds and hoses, take an oil sample and listen to the pump on load.
Clamp and platens
Check tie bars for scoring, platen parallelism and the toggle pins and bushings (toggle machines) for play.
Controls
Confirm the control powers up clean, the alarm history and that parts and support are still available for it.
Size for your molds
Measure tie-bar spacing, platen size, minimum and maximum mold height and ejector stroke against your largest mold.
More Injection Molding Machines types
Injection Molding Machines by Tonnage
Common Applications
Frequently Asked Questions
Why is 150-500 ton the most popular injection molding machine range?
This range offers the best versatility for most molding applications. Machines can handle parts from a few ounces to several pounds, accommodate multi-cavity molds, and run a wide variety of materials. Most custom molders standardize on this range for production flexibility.
What should I look for in a used 150-500 ton injection molding machine?
Key considerations include clamp mechanism type (toggle vs. hydraulic), shot size capacity, platen dimensions for your molds, control system age and capability, and overall condition (screw/barrel wear, platen parallelism). Check our inspection checklist for detailed guidance.
What's the typical price range for used 150-500 ton machines?
Used machines in this range typically sell for $25,000 to $150,000+ depending on age, brand, condition, and features. Premium brands like Arburg, Engel, and Sumitomo Demag command higher prices. All-electric machines also command premiums over hydraulic models. Request a quote on any listing or call 800-323-0307 for a current price.
How do I know what tonnage my mold needs?
A common rule of thumb is 2 to 5 tons of clamp force per square inch of projected part area, including the runner — about 2–3 tons for easy-flowing resins like PP and PE, 4–5 tons for engineering resins and thin walls. Then check that the mold fits between the tie bars and within the mold-height range, and that the shot is 20–80% of the barrel capacity.
Toggle or hydraulic clamp at 150–500 tons?
Toggle clamps (most Engel, Arburg, Milacron Magna T, Nissei, JSW and Haitian Mars presses) are fast and energy-efficient and dominate this range. Direct hydraulic clamps (Husky, Engel duo and older Van Dorn and HPM presses) hold even force across the platen and make mold-height changes easy. Both are common used.
Related Resources
Recently Sold 150-500 Ton Injection Molding Machines
View all sold injection molding machines →Need Help Finding the Right Tonnage?
Not sure what tonnage you need? Contact our team with your part specifications and we'll help you determine the right machine size for your application.



