Used Small Plastic Injection Molding Machines for Sale
All used injection molding machines (63) →
See all 63 Injection Molding Machines →
Recently sold
SOLDItem #6270
2015 JSW J85AD - All Electric
USA
SOLDItem #6693
Arburg 56 Ton Vertical Clamp Injection Molding Machine
USA
SOLDItem #5993
2006 Battenfeld Vertical R 150/400V Vertical/Vertical Injection Molding Machine
USA
SOLDItem #6697
Arburg 39 Ton Vertical Clamp Injection Molding Machine
USA
SOLDItem #6698
Arburg 56 Ton Injection Molding Machine
USA
SOLDItem #5995
2008 Nissei FNX110 Injection Molding Machine
USA
SOLDItem #6696
Arburg 39 Ton Injection Molding Machine
USA
SOLDItem #6694
Arburg 56 Ton Vertical Clamp Injection Molding Machine
USA
SOLDItem #6699
Arburg 56 Ton Injection Molding Machine
USA
SOLDItem #6695
Arburg Vertical Clamp Injection Molding Machine
USA
Item #6393
2019 Nissei 154 Ton Injection Molding Press w/Transformers
USA
SOLDItem #6294
2017 Engel 195-Ton All Electric Injection Molding Machine
USA
SOLDItem #6444
Nissei FN4000 Injection Molding Machine
USA
SOLDItem #6434
Nissei FNX140III Horizontal Injection Molding Machine
Canada
SOLDItem #6318
Milacron-Fanuc RoboShot SiB 165 Injection Molding Machine
USA
SOLDItem #6317
Milacron-Fanuc RoboShot SiB 110 Injection Molding Machine
USA
SOLDItem #6458
Cincinnati Milacron 120 Ton Injection Molding Press
USA
SOLDItem #6452
Arburg 78 Ton Injection Molding Press
USA
SOLDItem #6457
Milacron 110 Ton All-Electric Injection Molding Press
USA
SOLDItem #6453
Cincinnati Milacron 165 Ton Injection Molding Press
USA
SOLDItem #6451
Cincinnati Milacron 55 Ton Injection Molding Press
USA
SOLDItem #6028
2010 Sodick TR40VRE Vertical/Vertical
USA
SOLDItem #4771
Toyo - Ti-55H
USA
SOLDItem #3410
Battenfeld - BA 300V / 50H
USA
Small Injection Molding Machines by the numbers
From our own catalog: machines listed now and machines we have sold. Updated every few minutes.
Our track record
835 machines sold · 35 makes · model years 1980–2023 · 25 sold at our own auctions
By clamp force
| Clamp force | In stock now | Sold by Meadoworks |
|---|---|---|
| Under 100 tons | 10 | 444 |
| 100–299 tons | 7 | 390 |
By brand
| Brand | In stock now | Sold by Meadoworks | Model years |
|---|---|---|---|
| Milacron | 2 | 107 | 1988–2021 |
| Autojectors | 2 | 89 | 1983–2000 |
| Haitian | 2 | 0 | 2008 |
| Wittmann | 2 | 0 | 2021–2022 |
| Nissei | 1 | 102 | 1989–2023 |
| Engel | 1 | 92 | 1991–2022 |
| Sumitomo | 1 | 41 | 1994–2017 |
| Boy | 1 | 28 | 1990–2017 |
| Krauss Maffei | 1 | 19 | 1997–2022 |
| JSW | 1 | 15 | 1990–2020 |
Spec ranges across our machines
| Spec | Range | Machines |
|---|---|---|
| Clamp force | 10–199 tons | 851 |
| Shot size | 0.3–30 oz | 747 |
| Screw diameter | 15–60 mm | 295 |
| Tie-bar spacing (first figure) | 5–262 in | 588 |
| Platen size (first figure) | 6–108 in | 673 |
Controls we see most: PLC (32), Camac (29), TACT (29), Relay (26), Pathfinder (22), Fanuc (19)
Looking for Something Specific?
Most of our inventory sells before we can list it online. If you need a specific brand, model, or specification, tell us what you need—we have access to unlisted equipment and machines coming in from plant closures.
Browse Used Small Injection Molding Machines by Brand
Browse Used Small Injection Molding Machines by Country
Looking to Sell Your Small Injection Molding Machines?
Meadoworks is an active cash buyer of used industrial equipment. Get a free valuation from our AMEA-certified appraisers.
About Used Small Injection Molding Machines
Small injection molding machines (under 200 tons of clamp force) — also known as small plastic injection molding machines, small injection mold machines, or small moulding machines — are ideal for precision parts, connectors, small medical components, and low-to-medium volume production. These compact plastic injection machines offer lower purchase and operating costs, smaller floor space requirements, faster cycle times, and excellent precision for small-part applications.
Small plastic molding machines are available in horizontal and vertical configurations, with hydraulic, electric, and hybrid drive systems. All-electric small injection molding machines are particularly popular for medical and electronics applications requiring cleanroom compatibility and precision.
Meadoworks has sold more than 800 used injection molding machines under 200 tons, most often Milacron, Nissei, Engel, Autojectors, Newbury and Arburg. For prototypes and R&D rather than production, a desktop or benchtop machine is usually the better fit. Whether you need a mini injection molding machine for micro-parts or a small plastic injection molding machine for general-purpose production, contact us at 800-323-0307. Small injection molding equipment and small injection molding machines for sale are updated regularly in our inventory.
How to Choose a Used Small-Tonnage Injection Molding Machine
Under a few hundred tons
Small presses, often from about 20 to 200 tons, run connectors, medical parts, caps, and short-run tools. Horizontal toggles and vertical insert presses both live here. The mistake is a screw that is too big for the shot. A 200-ton press with a huge barrel will not hold a 0.2-ounce part.
Tie-bar spacing still matters. Small tools are sometimes built for a specific platen. A press with the tons and the wrong bolt pattern needs an adapter you should see before you buy.
Electric is common in this range
All-electric machines are common under a few hundred tons because the shot is small and the cycle is fast. Hydraulic machines are still everywhere in this range, especially older insert presses. Pick from the resin and the cleanliness of the room, then from the clamp.
A benchtop or a true desktop press is a different machine again, for prototypes. Do not expect it to run a production tool that needs mold protect, a robot, and a dryer.
Small-Tonnage Injection Molding Machine Specs to Compare
| Spec | Typical range | Why it matters |
|---|---|---|
| Clamp (tons) | Often about 20–200 tons | Enough for the projected area. More press just takes floor and power. |
| Shot size (oz) | The screw has to match a small shot. This is the spec that makes a small press wrong. | |
| Tie-bar spacing (in) | Small molds still have a footprint. Confirm the bars and the ejector pattern. | |
| Dry cycle (sec) | Connectors and packaging live on a short cycle. Compare it at your stroke. |
Clamp (tons)
Typical range: Often about 20–200 tons
Enough for the projected area. More press just takes floor and power.
Shot size (oz)
The screw has to match a small shot. This is the spec that makes a small press wrong.
Tie-bar spacing (in)
Small molds still have a footprint. Confirm the bars and the ejector pattern.
Dry cycle (sec)
Connectors and packaging live on a short cycle. Compare it at your stroke.
What to Inspect on a Used Small-Tonnage Injection Molding Machine
Match screw to shot
A barrel that holds ten times the shot will degrade the resin. Ask the screw diameter.
Fit the mold
Tie bars, locating ring, and ejector holes. Adapter plates hide a bad fit until the first mold change.
Cycle mold protect
Small tools are expensive relative to the press. Protect has to work.
Listen to the clamp
Toggle wear on a fast small press is a knock at lockup.
Related Equipment
- Desiccant Dryers
Dry the resin before it reaches the screw
- Water Temperature Controllers
Hold the mold at a setpoint
- Used 150–500 Ton Injection Molding Machines
The next size up from a small press
More Injection Molding Machines types
Types of Injection Molding
Common Applications
Frequently Asked Questions
How much does a small injection molding machine cost?
Used small plastic injection molding machines (under 200 tons) typically range from $10,000-$80,000 depending on brand, tonnage, age, and condition. Economy brands like Boy and Haitian start lower, while premium brands like Arburg and Engel command higher prices. All-electric small machines cost 20-40% more than hydraulic equivalents. Contact Meadoworks at 800-323-0307 for small injection molding machine price quotes.
What is the smallest injection molding machine available?
The smallest injection molding machines start at about 5-15 tons of clamp force, such as the Babyplast (6 tons) and Boy 12 (12 tons). These mini injection molding machines and miniature injection molding machines are used for very small precision parts, prototyping, and low-volume production. They can mold parts weighing fractions of a gram.
What can you make with a small injection molding machine?
Small plastic injection molding machines produce connectors, medical components, precision gears, micro-parts, caps, closures, dental tools, small housings, and prototype parts. They're ideal for parts with a projected area under 15-30 square inches. Small injection molding equipment is also popular for educational use and R&D labs.
What tonnage counts as a small injection molding machine?
Generally under 200 tons of clamp force — the range this page covers. Small presses mold medical, electronic and consumer parts with shot sizes of a fraction of an ounce up to about 10 oz. Meadoworks has sold more than 800 machines in this range; Nissei, Cincinnati Milacron, Engel, Autojectors and Newbury are the makes we have sold most.
How do I size a small injection molding machine for my part?
A common starting point is 2 to 5 tons of clamp force per square inch of projected part area (including runners), then check that the shot fills 20–80% of the barrel capacity and that the mold fits between the tie bars. Thin-wall and engineering resins need the high end of that tonnage range.
Related Resources
Need Help Finding the Right Equipment?
Contact our team with your specifications and we'll help you find the right machine.